vs.

      Volvo G726B vs. John Deere 672CH

      17 reasons to buy Volvo G726B:

      Operation

      Rear axle standard operating weight 11401 kg and 10095 kg 11 % more or 1306 kg
      Hydraulic system fluid volume 134 l. and 59 l. 56 % more or 75 l.
      Each tandem case fluid volume 100 l. and 75 l. 25 % more or 25 l.
      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes
      Front axle standard operating weight 4657 kg and 4563 kg 2 % more or 94 kg

      Motor

      Effective speeds output 7-8 175.2 kW and 147.6 kW 16 % more or 27.6 kW
      Maximum power 175.2 kW and 147.6 kW 16 % more or 27.6 kW
      Effective drives torque 7-8 1049.4 Nm and 847.4 Nm 19 % more or 202.0 Nm
      Displacement 7.1 l. and 6.8 l. 4 % more or 0.3 l.
      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Torque measured at 1400 rev / min and 1000 rev / min 29 % more or 400 rev

      Gear box

      Maximum forward speed 45.9 km/h and 40.2 km/h 12 % more or 5.7 km/h

      Front Axle

      Clearance 610 mm and 559 mm 8 % more or 51 mm

      Circle

      Maximum radius outside left tyres 2019.3 mm and 2160 mm 7 % less or 140.7 mm
      Right maximum radius outside tyres 2006.6 mm and 2110 mm 5 % less or 103.4 mm
      Maximum lifting above ground level 444.5 mm and 444 mm 0 % more or 0.5 mm
      Blade tilt rear angle 6.5 degrees and 5 degrees 23 % more or 1.5 degrees

      8 reasons to buy John Deere 672CH:

      Operation

      Cooling system fluid volume 42 l. and 28 l. 33 % more or 14 l.
      Fuel Capacity 403 l. and 378.5 l. 6 % more or 24.5 l.
      Rear differential/final drive fluid volume 36 l. and 23 l. 36 % more or 13 l.

      Hydraulic system

      Pump flow rate 173 l/min and 284 l/min 39 % less or 111 l/min

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum reverse gear 40.2 km/h and 32.8 km/h 18 % more or 7.4 km/h

      Dump

      Blade pulling at maximum weight 17827 kg and 10260.7 kg 42 % more or 7566.3 kg

      Circle

      Blade tilt front angle 49 degrees and 44 degrees 10 % more or 5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Between tyres width 2540 mm and 2460 mm
      Wheelbase 6096 mm and 5970 mm
      Blade base 2591 mm and 2670 mm
      Height to cab upper part 3099 mm and 3100 mm
      Dimensional length 9119 mm and 8580 mm

      Operation

      Overall standard operating weight 16057 kg and 14658 kg
      Transmission fluid volume 38 l. and 38 l.
      Tyre size 14.00 x 24, G-2 and 13.00-24
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Volvo and John Deere
      Model D7DGDE2 and 6068H
      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump hydraulic system with load sensing and Closed center variable displacement piston pump
      Overflow valve pressure 2700 kPa and 17581.6 kPa

      Gear box

      Transmission type powershift transmission and powershift
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 15 degrees and 20 degrees
      General fluctuations 16 degrees and 32 degrees

      Dump

      Mouldboard height 635 mm and 610 mm
      Mouldboard thickness 22.2 mm and 22 mm
      Left lateral displacement 673.1 mm and 683 mm
      Lateral right shift 673.1 mm and 683 mm
      Mouldboard width 3657.6 mm and 3.7 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Left shift 774.7 mm and 787 mm
      Right shift 749.3 mm and 724 mm
      Diameter 1683 mm and 1520 mm

      Images

      Sizes

      1. Dimensional length 9119 mm 1. Dimensional length 8580 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2460 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3100 mm
      4. Wheelbase 6096 mm 4. Wheelbase 5970 mm
      8. Blade base 2591 mm 8. Blade base 2670 mm