vs.

      Volvo G726B vs. John Deere JD570

      15 reasons to buy Volvo G726B:

      Operation

      Rear axle standard operating weight 11401 kg and 5715.3 kg 50 % more or 5685.7 kg
      Each tandem case fluid volume 100 l. and 18.9 l. 81 % more or 81.1 l.
      Fuel Capacity 378.5 l. and 189.3 l. 50 % more or 189.2 l.
      Cooling system fluid volume 28 l. and 20.8 l. 26 % more or 7.2 l.
      Front axle standard operating weight 4657 kg and 2494.8 kg 46 % more or 2162.2 kg
      Hydraulic system fluid volume 134 l. and 79.5 l. 41 % more or 54.5 l.

      Motor

      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev
      Effective speeds output 7-8 175.2 kW and 61.9 kW 65 % more or 113.3 kW
      Maximum power 175.2 kW and 61.9 kW 65 % more or 113.3 kW
      Effective drives torque 7-8 1049.4 Nm and 287.4 Nm 73 % more or 762.0 Nm
      Displacement 7.1 l. and 5 l. 30 % more or 2.1 l.

      Gear box

      Maximum forward speed 45.9 km/h and 34.4 km/h 25 % more or 11.5 km/h
      Maximum reverse gear 32.8 km/h and 10.9 km/h 67 % more or 21.9 km/h

      Front Axle

      Clearance 610 mm and 597.4 mm 2 % more or 12.6 mm

      Circle

      Maximum lifting above ground level 444.5 mm and 311.2 mm 30 % more or 133.3 mm

      2 reasons to buy John Deere JD570:

      Motor

      Power measured at 2300 rev / min and 2200 rev / min 4 % more or 100 rev

      Hydraulic system

      Pump flow rate 101.8 l/min and 284 l/min 64 % less or 182.2 l/min

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 22 degrees

      Sizes

      Height to cab upper part 3099 mm and 3200.4 mm
      Dimensional length 9119 mm and 7415.8 mm
      Between tyres width 2540 mm and 2386.6 mm
      Wheelbase 6096 mm and 5282.2 mm
      Blade base 2591 mm and 2337.8 mm

      Operation

      Overall standard operating weight 16057 kg and 9197.9 kg
      Tyre size 14.00 x 24, G-2 and 13.00-24
      Operating voltage 24 V and 12 V

      Motor

      Aspiration turbocharging and natural aspiration
      Manufacturer Volvo and John Deere

      Hydraulic system

      Type of pump hydraulic system with load sensing and piston pump
      Overflow valve pressure 2700 kPa and 13789.5 kPa

      Gear box

      Transmission type powershift transmission and powershift
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 15 degrees and 20 degrees
      General fluctuations 16 degrees and 30 degrees

      Dump

      Mouldboard width 3657.6 mm and 3657.6 mm
      Mouldboard height 635 mm and 609.6 mm
      Mouldboard thickness 22.2 mm and 15.7 mm
      Left lateral displacement 673.1 mm and 679.5 mm
      Lateral right shift 673.1 mm and 793.8 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Diameter 1683 mm and 1371.6 mm

      Images

      Sizes

      1. Dimensional length 9119 mm 1. Dimensional length 7415.8 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2386.6 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3200.4 mm
      4. Wheelbase 6096 mm 4. Wheelbase 5282.2 mm
      8. Blade base 2591 mm 8. Blade base 2337.8 mm