- Home/
- Comparison/
- Grader/
- Volvo G726B vs. Mitsubishi MG330-E
Volvo G726B vs. Mitsubishi MG330-E
11 reasons to buy Volvo G726B:
Operation
Transmission fluid volume | 38 l. and 23 l. | 39 % more or 15 l. |
Each tandem case fluid volume | 100 l. and 73 l. | 27 % more or 27 l. |
Generator current strength | 80 amperes and 40 amperes | 50 % more or 40 amperes |
Fuel Capacity | 378.5 l. and 230 l. | 39 % more or 148.5 l. |
Hydraulic system fluid volume | 134 l. and 67 l. | 50 % more or 67 l. |
Motor
Maximum power | 175.2 kW and 100.7 kW | 43 % more or 74.5 kW |
Gear box
Forward gears number | 8 and 6 | 25 % more or 2 |
Maximum forward speed | 45.9 km/h and 42.6 km/h | 7 % more or 3.3 km/h |
Front Axle
Clearance | 610 mm and 555 mm | 9 % more or 55 mm |
Circle
Blade tilt front angle | 44 degrees and 40 degrees | 9 % more or 4 degrees |
Blade tilt rear angle | 6.5 degrees and 5 degrees | 23 % more or 1.5 degrees |
5 reasons to buy Mitsubishi MG330-E:
Motor
Displacement | 7.5 l. and 7.1 l. | 5 % more or 0.4 l. |
Hydraulic system
Pump flow rate | 120 l/min and 284 l/min | 58 % less or 164 l/min |
Gear box
Reverse gears number | 6 and 4 | 33 % more or 2 |
Maximum reverse gear | 43.3 km/h and 32.8 km/h | 24 % more or 10.5 km/h |
Circle
Maximum lifting above ground level | 480 mm and 444.5 mm | 7 % more or 35.5 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 22 degrees and 26 degrees |
Sizes
Height to cab upper part | 3099 mm and 3130 mm |
Dimensional length | 9119 mm and 7820 mm |
Between tyres width | 2540 mm and 2450 mm |
Wheelbase | 6096 mm and 5700 mm |
Blade base | 2591 mm and 2500 mm |
Operation
Tyre size | 14.00 x 24, G-2 and 14.00-24-12 |
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 16057 kg and 15600 kg |
Motor
Manufacturer | Volvo and Mitsubishi |
Model | D7DGDE2 and 6D16-TE1 |
Power measured at | 2200 rev / min and 2200 rev / min |
Cylinders number | 6 and 6 |
Hydraulic system
Overflow valve pressure | 2700 kPa and 17.2 kPa |
Type of pump | hydraulic system with load sensing and Pump with double gear |
Gear box
Transmission type | powershift transmission and planetary gear |
Front Axle
Wheel tilt | 15 degrees and 20 degrees |
General fluctuations | 16 degrees and 30 degrees |
Dump
Mouldboard width | 3657.6 mm and 3710 mm |
Mouldboard height | 635 mm and 610 mm |
Mouldboard thickness | 22.2 mm and 22 mm |
Circle
Right shift | 749.3 mm and 1900 mm |
Left shift | 774.7 mm and 1890 mm |
Rotating | 360 degrees and 360 degrees |
Images
Sizes
1. Dimensional length | 9119 mm | 1. Dimensional length | 7820 mm |
2. Between tyres width | 2540 mm | 2. Between tyres width | 2450 mm |
3. Height to cab upper part | 3099 mm | 3. Height to cab upper part | 3130 mm |
4. Wheelbase | 6096 mm | 4. Wheelbase | 5700 mm |
8. Blade base | 2591 mm | 8. Blade base | 2500 mm |