vs.

      Volvo G726B vs. New Holland F140

      13 reasons to buy Volvo G726B:

      Operation

      Transmission fluid volume 38 l. and 25 l. 34 % more or 13 l.
      Fuel Capacity 378.5 l. and 340 l. 10 % more or 38.5 l.
      Each tandem case fluid volume 100 l. and 30 l. 70 % more or 70 l.
      Hydraulic system fluid volume 134 l. and 94.6 l. 29 % more or 39.4 l.
      Generator current strength 80 amperes and 70 amperes 12 % more or 10 amperes

      Motor

      Effective drives torque 7-8 1049.4 Nm and 141 Nm 87 % more or 908.4 Nm
      Displacement 7.1 l. and 5.9 l. 17 % more or 1.2 l.

      Gear box

      Maximum forward speed 45.9 km/h and 43 km/h 6 % more or 2.9 km/h
      Maximum reverse gear 32.8 km/h and 28.5 km/h 13 % more or 4.3 km/h

      Dump

      Maximum cutting depth 812.8 mm and 712 mm 12 % more or 100.8 mm

      Circle

      Maximum lifting above ground level 444.5 mm and 444 mm 0 % more or 0.5 mm
      Blade tilt front angle 44 degrees and 40 degrees 9 % more or 4 degrees
      Blade tilt rear angle 6.5 degrees and 5 degrees 23 % more or 1.5 degrees

      5 reasons to buy New Holland F140:

      Operation

      Cooling system fluid volume 40 l. and 28 l. 30 % more or 12 l.

      Hydraulic system

      Pump flow rate 192 l/min and 284 l/min 32 % less or 92 l/min

      Front Axle

      Clearance 622 mm and 610 mm 2 % more or 12 mm

      Circle

      Right maximum radius outside tyres 1742 mm and 2006.6 mm 13 % less or 264.6 mm
      Maximum radius outside left tyres 1582 mm and 2019.3 mm 22 % less or 437.3 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Dimensional length 9119 mm and 8521 mm
      Wheelbase 6096 mm and 6219 mm
      Between tyres width 2540 mm and 2510 mm
      Blade base 2591 mm and 2562 mm
      Height to cab upper part 3099 mm and 3340 mm

      Operation

      Tyre size 14.00 x 24, G-2 and 13.00 x 24 (12PR)
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Volvo and Cummins
      Model D7DGDE2 and 6BTA5.9 1 level
      Power measured at 2200 rev / min and 2200 rev / min
      Aspiration turbocharging and turbocharging

      Hydraulic system

      Type of pump hydraulic system with load sensing and full hydraulic system with load sensing
      Overflow valve pressure 2700 kPa and 17900 kPa

      Gear box

      Transmission type powershift transmission and Powershift transmission with direct drive
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 15 degrees and 18 degrees
      General fluctuations 16 degrees and 19 degrees

      Dump

      Mouldboard thickness 22.2 mm and 22 mm
      Left lateral displacement 673.1 mm and 533 mm
      Mouldboard width 3657.6 mm and 3658 mm
      Lateral right shift 673.1 mm and 686 mm
      Mouldboard height 635 mm and 622 mm
      Lowered blade pressure 8098.4 kg and 8636 kg

      Circle

      Diameter 1683 mm and 1753 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 9119 mm 1. Dimensional length 8521 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 6096 mm 4. Wheelbase 6219 mm
      8. Blade base 2591 mm 8. Blade base 2562 mm