- Home/
- Comparison/
- Grader/
- Volvo G730B vs. John Deere JD770
Volvo G730B vs. John Deere JD770
14 reasons to buy Volvo G730B:
Operation
Front axle standard operating weight | 4670 kg and 3728.5 kg | 20 % more or 941.5 kg |
Rear axle standard operating weight | 11433 kg and 9808.9 kg | 14 % more or 1624.1 kg |
Fuel Capacity | 378.5 l. and 265 l. | 30 % more or 113.5 l. |
Hydraulic system fluid volume | 134 l. and 117.3 l. | 12 % more or 16.7 l. |
Each tandem case fluid volume | 100 l. and 15.1 l. | 85 % more or 84.9 l. |
Motor
Maximum power | 170 kW and 105.9 kW | 38 % more or 64.1 kW |
Effective drives torque 7-8 | 1049.4 Nm and 596.6 Nm | 43 % more or 452.8 Nm |
Effective speeds output 7-8 | 170 kW and 105.9 kW | 38 % more or 64.1 kW |
Gear box
Maximum forward speed | 45.9 km/h and 40.4 km/h | 12 % more or 5.5 km/h |
Maximum reverse gear | 32.8 km/h and 13.8 km/h | 58 % more or 19.0 km/h |
Front Axle
Clearance | 610 mm and 571 mm | 6 % more or 39 mm |
Circle
Maximum radius outside left tyres | 2019.3 mm and 2340 mm | 14 % less or 320.7 mm |
Right maximum radius outside tyres | 2006.6 mm and 2350 mm | 15 % less or 343.4 mm |
Maximum lifting above ground level | 444.5 mm and 432 mm | 3 % more or 12.5 mm |
3 reasons to buy John Deere JD770:
Operation
Cooling system fluid volume | 37.9 l. and 28 l. | 26 % more or 9.9 l. |
Motor
Displacement | 8.7 l. and 7.1 l. | 18 % more or 1.6 l. |
Hydraulic system
Pump flow rate | 215.8 l/min and 284 l/min | 24 % less or 68.2 l/min |
Neutral reasons:
Steerage
Left and right hinge connection | 22 degrees and 25 degrees |
Sizes
Height to cab upper part | 3099 mm and 3200 mm |
Dimensional length | 9119 mm and 8470 mm |
Between tyres width | 2540 mm and 2440 mm |
Wheelbase | 6096 mm and 5970 mm |
Blade base | 2591 mm and 2720 mm |
Operation
Tyre size | 14.00 x 24, G-2 and 14.00-24 |
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 16103 kg and 13537.5 kg |
Motor
Aspiration | turbocharging and turbocharging |
Manufacturer | Volvo and John Deere |
Power measured at | 2200 rev / min and 2200 rev / min |
Torque measured at | 1400 rev / min and 1400 rev / min |
Cylinders number | 6 and 6 |
Hydraulic system
Type of pump | hydraulic system with load sensing and variable displacement with locking in the middle position |
Overflow valve pressure | 18615.8 kPa and 15513.2 kPa |
Gear box
Transmission type | powershift transmission and powershift |
Forward gears number | 8 and 8 |
Reverse gears number | 4 and 4 |
Front Axle
Wheel tilt | 18 degrees and 20 degrees |
General fluctuations | 16 degrees and 30 degrees |
Dump
Mouldboard height | 635 mm and 609.6 mm |
Mouldboard width | 3657.6 mm and 3657.6 mm |
Mouldboard thickness | 22.2 mm and 22.4 mm |
Left lateral displacement | 673.1 mm and 683 mm |
Lateral right shift | 673.1 mm and 683 mm |
Circle
Diameter | 1683 mm and 1500 mm |
Rotating | 360 degrees and 360 degrees |
Images
Sizes
4. Wheelbase | 6096 mm | 4. Wheelbase | 5970 mm |
8. Blade base | 2591 mm | 8. Blade base | 2720 mm |
1. Dimensional length | 9119 mm | 1. Dimensional length | 8470 mm |
2. Between tyres width | 2540 mm | 2. Between tyres width | 2440 mm |
3. Height to cab upper part | 3099 mm | 3. Height to cab upper part | 3200 mm |