vs.

      Volvo G740 VHP vs. Dressta RD200C

      10 reasons to buy Volvo G740 VHP:

      Operation

      Each tandem case fluid volume 100 l. and 30 l. 70 % more or 70 l.
      Cooling system fluid volume 50 l. and 40 l. 20 % more or 10 l.
      Transmission fluid volume 38 l. and 35 l. 8 % more or 3 l.
      Rear differential/final drive fluid volume 23 l. and 7.5 l. 67 % more or 15.5 l.

      Motor

      Maximum power 175.2 kW and 132.7 kW 24 % more or 42.5 kW
      Displacement 10.8 l. and 6.7 l. 38 % more or 4.1 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1

      Front Axle

      Clearance 610 mm and 550 mm 10 % more or 60 mm

      Dump

      Maximum cutting depth 800.1 mm and 350 mm 56 % more or 450.1 mm

      7 reasons to buy Dressta RD200C:

      Operation

      Fuel Capacity 380 l. and 378.5 l. 0 % more or 1.5 l.
      Hydraulic system fluid volume 130 l. and 90 l. 31 % more or 40 l.

      Motor

      Power measured at 2400 rev / min and 2100 rev / min 12 % more or 300 rev
      Torque measured at 1500 rev / min and 1300 rev / min 13 % more or 200 rev

      Hydraulic system

      Pump flow rate 80 l/min and 183 l/min 56 % less or 103 l/min

      Gear box

      Maximum forward speed 44.7 km/h and 43.8 km/h 2 % more or 0.9 km/h

      Circle

      Maximum lifting above ground level 500 mm and 436.9 mm 13 % more or 63.1 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Height to cab upper part 3099 mm and 3300 mm
      Dimensional length 8636 mm and 9540 mm
      Between tyres width 2540 mm and 2500 mm
      Wheelbase 6248 mm and 7300 mm
      Blade base 2718 mm and 3050 mm

      Operation

      Tyre size 14.00 x 24, G-2 and 14.00 - 24 G-2 16PR
      Operating voltage 24 V and 24 V
      Generator current strength 75 amperes and 75 amperes
      Overall standard operating weight 16153 kg and 36376 kg

      Motor

      Aspiration turbocharging and turbocharging and CAC
      Manufacturer Cummins and Cummins
      Model M11 and QSB 6.7

      Hydraulic system

      Overflow valve pressure 17236.9 kPa and 14000 kPa
      Type of pump hydraulic system with load sensing and axial piston pump

      Gear box

      Maximum reverse gear 31.4 km/h and 31.4 km/h
      Transmission type powershift transmission and powershift transmission

      Front Axle

      Wheel tilt 18 degrees and 22 degrees
      General fluctuations 16 degrees and 40 degrees

      Dump

      Mouldboard width 4572 mm and 3660 mm
      Mouldboard height 736.6 mm and 670 mm
      Left lateral displacement 673.1 mm and 800 mm
      Mouldboard thickness 25.4 mm and 22 mm
      Lateral right shift 673.1 mm and 800 mm

      Circle

      Diameter 1683 mm and 1350 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8636 mm 1. Dimensional length 9540 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2500 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3300 mm
      4. Wheelbase 6248 mm 4. Wheelbase 7300 mm
      8. Blade base 2718 mm 8. Blade base 3050 mm