vs.

      Volvo G740 VHP vs. John Deere 770A

      16 reasons to buy Volvo G740 VHP:

      Operation

      Generator current strength 75 amperes and 42 amperes 44 % more or 33 amperes
      Front axle standard operating weight 4851 kg and 3877.3 kg 20 % more or 973.7 kg
      Rear axle standard operating weight 11302 kg and 9848.4 kg 13 % more or 1453.6 kg
      Fuel Capacity 378.5 l. and 265 l. 30 % more or 113.5 l.
      Cooling system fluid volume 50 l. and 26.5 l. 47 % more or 23.5 l.
      Each tandem case fluid volume 100 l. and 18.9 l. 81 % more or 81.1 l.

      Motor

      Maximum power 175.2 kW and 111.9 kW 36 % more or 63.3 kW
      Effective drives torque 7-8 1145.7 Nm and 630.5 Nm 45 % more or 515.2 Nm
      Displacement 10.8 l. and 7.6 l. 30 % more or 3.2 l.
      Effective speeds output 7-8 175.2 kW and 111.9 kW 36 % more or 63.3 kW

      Gear box

      Maximum forward speed 43.8 km/h and 40.4 km/h 8 % more or 3.4 km/h
      Maximum reverse gear 31.4 km/h and 13.8 km/h 56 % more or 17.6 km/h

      Front Axle

      Clearance 610 mm and 572 mm 6 % more or 38 mm

      Circle

      Right maximum radius outside tyres 2006.6 mm and 2250 mm 11 % less or 243.4 mm
      Maximum lifting above ground level 436.9 mm and 432 mm 1 % more or 4.9 mm
      Maximum radius outside left tyres 2019.3 mm and 2280 mm 11 % less or 260.7 mm

      4 reasons to buy John Deere 770A:

      Operation

      Hydraulic system fluid volume 117 l. and 90 l. 23 % more or 27 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Hydraulic system

      Pump flow rate 136.3 l/min and 183 l/min 26 % less or 46.7 l/min

      Circle

      Blade tilt rear angle 10 degrees and 2.5 degrees 75 % more or 7.5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Height to cab upper part 3099 mm and 3200 mm
      Dimensional length 8636 mm and 8470 mm
      Between tyres width 2540 mm and 2440 mm
      Wheelbase 6248 mm and 5970 mm
      Blade base 2718 mm and 2720 mm

      Operation

      Operating voltage 24 V and 24 V
      Overall standard operating weight 16153 kg and 13725.7 kg
      Tyre size 14.00 x 24, G-2 and 14.00-25

      Motor

      Aspiration turbocharging and Turbocharging with intercooler
      Manufacturer Cummins and John Deere
      Model M11 and 6-466A
      Torque measured at 1300 rev / min and 1300 rev / min

      Hydraulic system

      Type of pump hydraulic system with load sensing and Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume

      Gear box

      Transmission type powershift transmission and powershift
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 16 degrees and 30 degrees

      Dump

      Mouldboard thickness 25.4 mm and 22.4 mm
      Mouldboard height 736.6 mm and 609.6 mm
      Left lateral displacement 673.1 mm and 683 mm
      Lateral right shift 673.1 mm and 683 mm
      Mouldboard width 4572 mm and 3657.6 mm

      Circle

      Blade tilt front angle 44 degrees and 44 degrees
      Diameter 1683 mm and 1500 mm
      Rotating 360 degrees and 360 degrees
      Left shift 774.7 mm and 851 mm
      Right shift 749.3 mm and 813 mm

      Images

      Sizes

      1. Dimensional length 8636 mm 1. Dimensional length 8470 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2440 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 6248 mm 4. Wheelbase 5970 mm
      8. Blade base 2718 mm 8. Blade base 2720 mm