vs.

      Volvo G740B vs. Caterpillar 135H

      18 reasons to buy Volvo G740B:

      Operation

      Front axle standard operating weight 5052 kg and 3738.5 kg 26 % more or 1313.5 kg
      Rear axle standard operating weight 11788 kg and 9343.1 kg 21 % more or 2444.9 kg
      Fuel Capacity 454 l. and 340.7 l. 25 % more or 113.3 l.
      Cooling system fluid volume 50 l. and 39.4 l. 21 % more or 10.6 l.
      Hydraulic system fluid volume 134 l. and 67 l. 50 % more or 67 l.
      Each tandem case fluid volume 100 l. and 48.1 l. 52 % more or 51.9 l.
      Generator current strength 75 amperes and 35 amperes 53 % more or 40 amperes

      Motor

      Torque measured at 1100 rev / min and 1000 rev / min 9 % more or 100 rev
      Maximum power 181.2 kW and 115.6 kW 36 % more or 65.6 kW
      Effective drives torque 7-8 1147 Nm and 848 Nm 26 % more or 299 Nm
      Effective speeds output 7-8 181.2 kW and 115.6 kW 36 % more or 65.6 kW
      Displacement 9.6 l. and 7.2 l. 25 % more or 2.4 l.
      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Gear box

      Maximum forward speed 43.8 km/h and 42 km/h 4 % more or 1.8 km/h

      Front Axle

      Clearance 610 mm and 608 mm 0 % more or 2 mm

      Dump

      Maximum cutting depth 812.8 mm and 775 mm 5 % more or 37.8 mm

      Circle

      Blade tilt front angle 44 degrees and 40 degrees 9 % more or 4 degrees
      Blade tilt rear angle 6.5 degrees and 5 degrees 23 % more or 1.5 degrees

      7 reasons to buy Caterpillar 135H:

      Hydraulic system

      Pump flow rate 144 l/min and 284 l/min 49 % less or 140 l/min

      Gear box

      Maximum reverse gear 33.2 km/h and 31.4 km/h 5 % more or 1.8 km/h
      Reverse gears number 6 and 4 33 % more or 2

      Dump

      Blade pulling at maximum weight 11505 kg and 10019.4 kg 13 % more or 1485.6 kg

      Circle

      Maximum radius outside left tyres 1840 mm and 2019.3 mm 9 % less or 179.3 mm
      Right maximum radius outside tyres 1912 mm and 2006.6 mm 5 % less or 94.6 mm
      Maximum lifting above ground level 457 mm and 436.9 mm 4 % more or 20.1 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 20 degrees

      Sizes

      Height to cab upper part 3099 mm and 3332 mm
      Dimensional length 9220 mm and 10064 mm
      Between tyres width 2540 mm and 2402 mm
      Wheelbase 6248 mm and 5923 mm
      Blade base 2718 mm and 2596 mm

      Operation

      Overall standard operating weight 16840 kg and 13081.6 kg
      Operating voltage 24 V and 24 V

      Motor

      Cylinders number 6 and 6
      Manufacturer Volvo and Caterpillar
      Model D10BGAE2 and 3126B DITA ATAAC VHP

      Hydraulic system

      Type of pump hydraulic system with load sensing and variable displacement piston pump
      Overflow valve pressure 18615.8 kPa and 24131.6 kPa

      Gear box

      Transmission type powershift transmission and direct drive, powershift
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 16 degrees and 32 degrees

      Dump

      Lowered blade pressure 8940.8 kg and 9822 kg
      Left lateral displacement 673.1 mm and 524 mm
      Lateral right shift 673.1 mm and 660 mm
      Mouldboard width 3657.6 mm and 3658 mm
      Mouldboard height 736.6 mm and 610 mm
      Mouldboard thickness 25.4 mm and 22 mm

      Circle

      Left shift 774.7 mm and 625 mm
      Right shift 749.3 mm and 628 mm

      Images

      Sizes

      8. Blade base 2718 mm 8. Blade base 2596 mm
      1. Dimensional length 9220 mm 1. Dimensional length 10064 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2402 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3332 mm
      4. Wheelbase 6248 mm 4. Wheelbase 5923 mm