vs.

      Volvo G740B vs. John Deere 672D

      19 reasons to buy Volvo G740B:

      Operation

      Each tandem case fluid volume 100 l. and 75.7 l. 24 % more or 24.3 l.
      Front axle standard operating weight 5052 kg and 4358 kg 14 % more or 694 kg
      Rear axle standard operating weight 11788 kg and 10895 kg 8 % more or 893 kg
      Fuel Capacity 454 l. and 401.2 l. 12 % more or 52.8 l.
      Cooling system fluid volume 50 l. and 45.4 l. 9 % more or 4.6 l.
      Hydraulic system fluid volume 134 l. and 53 l. 60 % more or 81 l.
      Transmission fluid volume 38 l. and 22.7 l. 40 % more or 15.3 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Torque measured at 1100 rev / min and 1000 rev / min 9 % more or 100 rev
      Effective speeds output 7-8 181.2 kW and 138 kW 24 % more or 43.2 kW
      Effective drives torque 7-8 1147 Nm and 847.4 Nm 26 % more or 299.6 Nm
      Displacement 9.6 l. and 6.8 l. 29 % more or 2.8 l.
      Maximum power 181.2 kW and 138 kW 24 % more or 43.2 kW

      Gear box

      Maximum forward speed 43.8 km/h and 40 km/h 9 % more or 3.8 km/h

      Front Axle

      Clearance 610 mm and 587 mm 4 % more or 23 mm

      Circle

      Maximum radius outside left tyres 2019.3 mm and 2100 mm 4 % less or 80.7 mm
      Right maximum radius outside tyres 2006.6 mm and 2080 mm 4 % less or 73.4 mm
      Blade tilt front angle 44 degrees and 42 degrees 5 % more or 2 degrees
      Blade tilt rear angle 6.5 degrees and 5 degrees 23 % more or 1.5 degrees

      7 reasons to buy John Deere 672D:

      Operation

      Rear differential/final drive fluid volume 36 l. and 23 l. 36 % more or 13 l.
      Generator current strength 100 amperes and 75 amperes 25 % more or 25 amperes

      Hydraulic system

      Pump flow rate 207 l/min and 284 l/min 27 % less or 77 l/min

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum reverse gear 40 km/h and 31.4 km/h 21 % more or 8.6 km/h

      Dump

      Blade pulling at maximum weight 19105 kg and 10019.4 kg 48 % more or 9085.6 kg

      Circle

      Maximum lifting above ground level 470 mm and 436.9 mm 7 % more or 33.1 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 22 degrees

      Sizes

      Wheelbase 6248 mm and 6120 mm
      Blade base 2718 mm and 2568 mm
      Height to cab upper part 3099 mm and 3180 mm
      Dimensional length 9220 mm and 8804 mm
      Between tyres width 2540 mm and 2490 mm

      Operation

      Tyre size 14.00 x 24, G-2 and 14.00R24 Radial PR
      Operating voltage 24 V and 24 V
      Overall standard operating weight 16840 kg and 15254 kg

      Motor

      Model D10BGAE2 and 6068H
      Cylinders number 6 and 6
      Aspiration turbocharging and Turbocharged engine with subsequent cooling of charging air by oncoming air flow
      Manufacturer Volvo and John Deere

      Hydraulic system

      Overflow valve pressure 18615.8 kPa and 18960.6 kPa
      Type of pump hydraulic system with load sensing and variable displacement piston pump

      Gear box

      Transmission type powershift transmission and Powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 16 degrees and 32 degrees

      Dump

      Left lateral displacement 673.1 mm and 680 mm
      Lateral right shift 673.1 mm and 680 mm
      Mouldboard width 3657.6 mm and 3660 mm
      Mouldboard height 736.6 mm and 610 mm
      Mouldboard thickness 25.4 mm and 22 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Left shift 774.7 mm and 787 mm
      Right shift 749.3 mm and 724 mm
      Diameter 1683 mm and 1520 mm

      Images

      Sizes

      1. Dimensional length 9220 mm 1. Dimensional length 8804 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2490 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3180 mm
      4. Wheelbase 6248 mm 4. Wheelbase 6120 mm
      8. Blade base 2718 mm 8. Blade base 2568 mm