vs.

      Volvo G740B vs. John Deere 870D

      17 reasons to buy Volvo G740B:

      Operation

      Rear axle standard operating weight 11788 kg and 11589 kg 2 % more or 199 kg
      Cooling system fluid volume 50 l. and 49.2 l. 2 % more or 0.8 l.
      Hydraulic system fluid volume 134 l. and 53 l. 60 % more or 81 l.
      Fuel Capacity 454 l. and 401.2 l. 12 % more or 52.8 l.
      Transmission fluid volume 38 l. and 22.7 l. 40 % more or 15.3 l.
      Each tandem case fluid volume 100 l. and 75.7 l. 24 % more or 24.3 l.
      Front axle standard operating weight 5052 kg and 4173 kg 17 % more or 879 kg

      Motor

      Effective speeds output 7-8 181.2 kW and 175.2 kW 3 % more or 6.0 kW
      Maximum power 181.2 kW and 175.2 kW 3 % more or 6.0 kW
      Displacement 9.6 l. and 8.1 l. 16 % more or 1.5 l.
      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Torque measured at 1100 rev / min and 1000 rev / min 9 % more or 100 rev

      Gear box

      Maximum forward speed 43.8 km/h and 41.1 km/h 6 % more or 2.7 km/h

      Circle

      Maximum radius outside left tyres 2019.3 mm and 2320 mm 13 % less or 300.7 mm
      Right maximum radius outside tyres 2006.6 mm and 2310 mm 13 % less or 303.4 mm
      Blade tilt front angle 44 degrees and 42 degrees 5 % more or 2 degrees
      Blade tilt rear angle 6.5 degrees and 5 degrees 23 % more or 1.5 degrees

      9 reasons to buy John Deere 870D:

      Operation

      Rear differential/final drive fluid volume 36 l. and 23 l. 36 % more or 13 l.
      Generator current strength 100 amperes and 75 amperes 25 % more or 25 amperes

      Motor

      Effective drives torque 7-8 1238 Nm and 1147 Nm 7 % more or 91 Nm

      Hydraulic system

      Pump flow rate 207 l/min and 284 l/min 27 % less or 77 l/min

      Gear box

      Maximum reverse gear 41.1 km/h and 31.4 km/h 24 % more or 9.7 km/h
      Reverse gears number 8 and 4 50 % more or 4

      Front Axle

      Clearance 638 mm and 610 mm 4 % more or 28 mm

      Dump

      Blade pulling at maximum weight 13299 kg and 10019.4 kg 25 % more or 3279.6 kg

      Circle

      Maximum lifting above ground level 437 mm and 436.9 mm 0 % more or 0.1 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 22 degrees

      Sizes

      Between tyres width 2540 mm and 2510 mm
      Wheelbase 6248 mm and 6120 mm
      Blade base 2718 mm and 2533 mm
      Height to cab upper part 3099 mm and 3180 mm
      Dimensional length 9220 mm and 8804 mm

      Operation

      Overall standard operating weight 16840 kg and 15760 kg
      Tyre size 14.00 x 24, G-2 and 14.00R24 Radial PR
      Operating voltage 24 V and 24 V

      Motor

      Cylinders number 6 and 6
      Manufacturer Volvo and John Deere
      Model D10BGAE2 and 6081H
      Aspiration turbocharging and Turbocharged engine with subsequent cooling of charging air by oncoming air flow

      Hydraulic system

      Type of pump hydraulic system with load sensing and variable displacement piston pump
      Overflow valve pressure 18615.8 kPa and 18960.6 kPa

      Gear box

      Transmission type powershift transmission and Powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 16 degrees and 32 degrees

      Dump

      Mouldboard height 736.6 mm and 686 mm
      Mouldboard thickness 25.4 mm and 25 mm
      Left lateral displacement 673.1 mm and 680 mm
      Lateral right shift 673.1 mm and 680 mm
      Mouldboard width 3657.6 mm and 4300 mm

      Circle

      Diameter 1683 mm and 1520 mm
      Rotating 360 degrees and 360 degrees
      Left shift 774.7 mm and 787 mm
      Right shift 749.3 mm and 724 mm

      Images

      Sizes

      1. Dimensional length 9220 mm 1. Dimensional length 8804 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3180 mm
      4. Wheelbase 6248 mm 4. Wheelbase 6120 mm
      8. Blade base 2718 mm 8. Blade base 2533 mm