vs.

      Volvo G740B vs. John Deere JD670

      17 reasons to buy Volvo G740B:

      Operation

      Fuel Capacity 454 l. and 227 l. 50 % more or 227 l.
      Cooling system fluid volume 50 l. and 26.5 l. 47 % more or 23.5 l.
      Hydraulic system fluid volume 134 l. and 106 l. 21 % more or 28 l.
      Each tandem case fluid volume 100 l. and 15.1 l. 85 % more or 84.9 l.
      Front axle standard operating weight 5052 kg and 3471 kg 31 % more or 1581 kg
      Rear axle standard operating weight 11788 kg and 8245 kg 30 % more or 3543 kg

      Motor

      Effective speeds output 7-8 181.2 kW and 93.2 kW 49 % more or 88.0 kW
      Maximum power 181.2 kW and 93.2 kW 49 % more or 88.0 kW
      Effective drives torque 7-8 1147 Nm and 504.4 Nm 56 % more or 642.6 Nm
      Displacement 9.6 l. and 6.8 l. 29 % more or 2.8 l.

      Gear box

      Maximum forward speed 43.8 km/h and 38.4 km/h 12 % more or 5.4 km/h
      Maximum reverse gear 31.4 km/h and 12.3 km/h 61 % more or 19.1 km/h

      Front Axle

      Clearance 610 mm and 559 mm 8 % more or 51 mm

      Circle

      Maximum radius outside left tyres 2019.3 mm and 2130 mm 5 % less or 110.7 mm
      Right maximum radius outside tyres 2006.6 mm and 2130 mm 6 % less or 123.4 mm
      Maximum lifting above ground level 436.9 mm and 409 mm 6 % more or 27.9 mm
      Blade tilt front angle 44 degrees and 35 degrees 20 % more or 9 degrees

      3 reasons to buy John Deere JD670:

      Motor

      Power measured at 2300 rev / min and 2200 rev / min 4 % more or 100 rev
      Torque measured at 1300 rev / min and 1100 rev / min 15 % more or 200 rev

      Hydraulic system

      Pump flow rate 132 l/min and 284 l/min 54 % less or 152 l/min

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Blade base 2718 mm and 2540 mm
      Height to cab upper part 3099 mm and 3200 mm
      Dimensional length 9220 mm and 8310 mm
      Between tyres width 2540 mm and 2340 mm
      Wheelbase 6248 mm and 5970 mm

      Operation

      Tyre size 14.00 x 24, G-2 and 13.00-24
      Operating voltage 24 V and 24 V
      Overall standard operating weight 16840 kg and 11716 kg

      Motor

      Manufacturer Volvo and John Deere
      Cylinders number 6 and 6
      Aspiration turbocharging and turbocharging

      Hydraulic system

      Type of pump hydraulic system with load sensing and Variable displacement with locking in the middle position
      Overflow valve pressure 18615.8 kPa and 15513.2 kPa

      Gear box

      Transmission type powershift transmission and powershift
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      General fluctuations 16 degrees and 30 degrees
      Wheel tilt 18 degrees and 20 degrees

      Dump

      Mouldboard width 3657.6 mm and 3.7 mm
      Mouldboard height 736.6 mm and 610 mm
      Mouldboard thickness 25.4 mm and 22 mm
      Left lateral displacement 673.1 mm and 683 mm
      Lateral right shift 673.1 mm and 683 mm

      Circle

      Diameter 1683 mm and 1470 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 9220 mm 1. Dimensional length 8310 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2340 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 6248 mm 4. Wheelbase 5970 mm
      8. Blade base 2718 mm 8. Blade base 2540 mm