vs.

      Volvo G740B vs. Komatsu GD555-3

      14 reasons to buy Volvo G740B:

      Operation

      Rear axle standard operating weight 11788 kg and 10040 kg 15 % more or 1748 kg
      Fuel Capacity 454 l. and 340 l. 25 % more or 114 l.
      Cooling system fluid volume 50 l. and 42 l. 16 % more or 8 l.
      Hydraulic system fluid volume 134 l. and 85 l. 37 % more or 49 l.
      Front axle standard operating weight 5052 kg and 4000 kg 21 % more or 1052 kg
      Each tandem case fluid volume 100 l. and 83 l. 17 % more or 17 l.

      Motor

      Effective drives torque 7-8 1147 Nm and 729.4 Nm 36 % more or 417.6 Nm
      Displacement 9.6 l. and 5.9 l. 39 % more or 3.7 l.
      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Effective speeds output 7-8 181.2 kW and 119.3 kW 34 % more or 61.9 kW
      Maximum power 181.2 kW and 119.3 kW 34 % more or 61.9 kW

      Gear box

      Maximum forward speed 43.8 km/h and 42.9 km/h 2 % more or 0.9 km/h

      Circle

      Blade tilt front angle 44 degrees and 40 degrees 9 % more or 4 degrees
      Blade tilt rear angle 6.5 degrees and 5 degrees 23 % more or 1.5 degrees

      9 reasons to buy Komatsu GD555-3:

      Operation

      Generator current strength 90 amperes and 75 amperes 17 % more or 15 amperes
      Transmission fluid volume 45 l. and 38 l. 16 % more or 7 l.

      Motor

      Torque measured at 1500 rev / min and 1100 rev / min 27 % more or 400 rev

      Hydraulic system

      Pump flow rate 204.4 l/min and 284 l/min 28 % less or 79.6 l/min

      Gear box

      Maximum reverse gear 39.1 km/h and 31.4 km/h 20 % more or 7.7 km/h

      Dump

      Maximum cutting depth 835 mm and 812.8 mm 3 % more or 22.2 mm

      Circle

      Maximum radius outside left tyres 2000 mm and 2019.3 mm 1 % less or 19.3 mm
      Right maximum radius outside tyres 2000 mm and 2006.6 mm 0 % less or 6.6 mm
      Maximum lifting above ground level 485 mm and 436.9 mm 10 % more or 48.1 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 23 degrees

      Sizes

      Dimensional length 9220 mm and 9390 mm
      Between tyres width 2540 mm and 2525 mm
      Wheelbase 6248 mm and 5850 mm
      Blade base 2718 mm and 2500 mm
      Height to cab upper part 3099 mm and 3100 mm

      Operation

      Operating voltage 24 V and 24 V
      Overall standard operating weight 16840 kg and 14040 kg
      Tyre size 14.00 x 24, G-2 and Low-pressure, without inner tube, 14.00 X 24, 12 layers - G2

      Motor

      Aspiration turbocharging and turbocharging and cooling at the outlet
      Manufacturer Volvo and Komatsu
      Model D10BGAE2 and SAA6D102E-2
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump hydraulic system with load sensing and Hydraulic system of Closed Center Load Sensing System (CLSS)
      Overflow valve pressure 18615.8 kPa and 20684.3 kPa

      Gear box

      Transmission type powershift transmission and powershift transmission
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Clearance 610 mm and 610 mm
      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 16 degrees and 32 degrees

      Dump

      Mouldboard width 3657.6 mm and 3710 mm
      Mouldboard height 736.6 mm and 660 mm
      Mouldboard thickness 25.4 mm and 22 mm
      Left lateral displacement 673.1 mm and 820 mm
      Lateral right shift 673.1 mm and 820 mm

      Circle

      Diameter 1683 mm and 1529.1 mm
      Rotating 360 degrees and 360 degrees
      Left shift 774.7 mm and 625 mm
      Right shift 749.3 mm and 625 mm

      Images

      Sizes

      1. Dimensional length 9220 mm 1. Dimensional length 9390 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2525 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3100 mm
      4. Wheelbase 6248 mm 4. Wheelbase 5850 mm
      8. Blade base 2718 mm 8. Blade base 2500 mm