vs.

      Volvo G740B vs. Terex TG190TA-3

      14 reasons to buy Volvo G740B:

      Operation

      Front axle standard operating weight 5052 kg and 5000 kg 1 % more or 52 kg
      Cooling system fluid volume 50 l. and 42 l. 16 % more or 8 l.
      Transmission fluid volume 38 l. and 34 l. 11 % more or 4 l.
      Rear differential/final drive fluid volume 23 l. and 15 l. 35 % more or 8 l.
      Each tandem case fluid volume 100 l. and 21 l. 79 % more or 79 l.
      Generator current strength 75 amperes and 55 amperes 27 % more or 20 amperes

      Motor

      Displacement 9.6 l. and 6 l. 37 % more or 3.6 l.
      Maximum power 181.2 kW and 131.2 kW 28 % more or 50.0 kW

      Gear box

      Maximum reverse gear 31.4 km/h and 19.4 km/h 38 % more or 12.0 km/h
      Reverse gears number 4 and 3 25 % more or 1
      Maximum forward speed 43.8 km/h and 40 km/h 9 % more or 3.8 km/h
      Forward gears number 8 and 6 25 % more or 2

      Front Axle

      Clearance 610 mm and 546 mm 10 % more or 64 mm

      Circle

      Maximum lifting above ground level 436.9 mm and 110 mm 75 % more or 326.9 mm

      5 reasons to buy Terex TG190TA-3:

      Operation

      Rear axle standard operating weight 13700 kg and 11788 kg 14 % more or 1912 kg
      Fuel Capacity 480 l. and 454 l. 5 % more or 26 l.
      Hydraulic system fluid volume 170 l. and 134 l. 21 % more or 36 l.

      Hydraulic system

      Pump flow rate 99 l/min and 284 l/min 65 % less or 185 l/min

      Dump

      Blade pulling at maximum weight 14181.1 kg and 10019.4 kg 29 % more or 4161.7 kg

      Neutral reasons:

      Sizes

      Height to cab upper part 3099 mm and 3300 mm
      Wheelbase 6248 mm and 6136 mm
      Dimensional length 9220 mm and 10266 mm
      Between tyres width 2540 mm and 2490 mm

      Operation

      Overall standard operating weight 16840 kg and 18700 kg
      Tyre size 14.00 x 24, G-2 and 14.00 -24TG
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and turbocharging, water cooling
      Manufacturer Volvo and Cummins

      Hydraulic system

      Type of pump hydraulic system with load sensing and axial piston pump
      Overflow valve pressure 18615.8 kPa and 127.8 kPa

      Gear box

      Transmission type powershift transmission and powershift transmission with torque converter

      Front Axle

      Wheel tilt 18 degrees and 17 degrees
      General fluctuations 16 degrees and 15 degrees

      Dump

      Mouldboard width 3657.6 mm and 3660 mm
      Mouldboard height 736.6 mm and 630 mm
      Mouldboard thickness 25.4 mm and 20 mm

      Circle

      Diameter 1683 mm and 1510 mm

      Images

      Sizes

      1. Dimensional length 9220 mm 1. Dimensional length 10266 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2490 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3300 mm
      4. Wheelbase 6248 mm 4. Wheelbase 6136 mm