vs.

      Volvo G746B vs. Volvo G730 VHP

      10 reasons to buy Volvo G746B:

      Operation

      Rear axle standard operating weight 12145 kg and 10957 kg 10 % more or 1188 kg
      Fuel Capacity 454 l. and 378.5 l. 17 % more or 75.5 l.
      Front axle standard operating weight 5205 kg and 4806 kg 8 % more or 399 kg
      Hydraulic system fluid volume 134 l. and 90 l. 33 % more or 44 l.
      Generator current strength 80 amperes and 75 amperes 6 % more or 5 amperes

      Motor

      Displacement 9.6 l. and 8.3 l. 14 % more or 1.3 l.
      Effective speeds output 7-8 181.2 kW and 160.3 kW 12 % more or 20.9 kW
      Maximum power 181.2 kW and 160.3 kW 12 % more or 20.9 kW
      Effective drives torque 7-8 1147 Nm and 964 Nm 16 % more or 183 Nm

      Dump

      Blade pulling at maximum weight 10930.7 kg and 9859.3 kg 10 % more or 1071.4 kg

      4 reasons to buy Volvo G730 VHP:

      Operation

      Cooling system fluid volume 47 l. and 31 l. 34 % more or 16 l.

      Hydraulic system

      Pump flow rate 191 l/min and 284 l/min 33 % less or 93 l/min

      Gear box

      Maximum forward speed 45.9 km/h and 43.8 km/h 5 % more or 2.1 km/h
      Maximum reverse gear 32.8 km/h and 31.4 km/h 4 % more or 1.4 km/h

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 22 degrees

      Sizes

      Height to cab upper part 3099 mm and 3099 mm
      Dimensional length 9220 mm and 8484 mm
      Between tyres width 2540 mm and 2540 mm
      Wheelbase 2718 mm and 6096 mm
      Blade base 2718 mm and 2591 mm

      Operation

      Overall standard operating weight 17350 kg and 15763 kg
      Transmission fluid volume 38 l. and 38 l.
      Rear differential/final drive fluid volume 23 l. and 23 l.
      Each tandem case fluid volume 100 l. and 100 l.
      Tyre size 14.00 x 24, G-2 and 14.00 x 24, G-2
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and turbocharging
      Manufacturer Volvo and Cummins
      Model D10BGAE2 and 6C8.3

      Hydraulic system

      Type of pump hydraulic system with load sensing and hydraulic system with load sensing
      Overflow valve pressure 18615.8 kPa and 17236.9 kPa

      Gear box

      Reverse gears number 4 and 4
      Transmission type powershift transmission and powershift transmission
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 15 degrees and 18 degrees
      General fluctuations 16 degrees and 16 degrees
      Clearance 610 mm and 610 mm

      Dump

      Lowered blade pressure 9211.6 kg and 8357.9 kg
      Mouldboard width 3657.6 mm and 3657.6 mm
      Mouldboard height 736.6 mm and 635 mm
      Mouldboard thickness 25.4 mm and 22.2 mm
      Maximum cutting depth 812.8 mm and 812.8 mm
      Left lateral displacement 673.1 mm and 673.1 mm
      Lateral right shift 673.1 mm and 673.1 mm

      Circle

      Blade tilt rear angle 6.5 degrees and 6.5 degrees
      Diameter 1683 mm and 1683 mm
      Rotating 360 degrees and 360 degrees
      Left shift 774.7 mm and 774.7 mm
      Right shift 749.3 mm and 749.3 mm
      Maximum radius outside left tyres 2019.3 mm and 2019.3 mm
      Right maximum radius outside tyres 2006.6 mm and 2006.6 mm
      Maximum lifting above ground level 444.5 mm and 444.5 mm
      Blade tilt front angle 44 degrees and 44 degrees

      Images

      Sizes

      1. Dimensional length 9220 mm 1. Dimensional length 8484 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2540 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3099 mm
      4. Wheelbase 2718 mm 4. Wheelbase 6096 mm
      8. Blade base 2718 mm 8. Blade base 2591 mm