vs.

      Volvo G780 VHP vs. Komatsu GD655-5

      14 reasons to buy Volvo G780 VHP:

      Operation

      Cooling system fluid volume 50 l. and 25 l. 50 % more or 25 l.
      Rear differential/final drive fluid volume 34 l. and 17 l. 50 % more or 17 l.
      Hydraulic system fluid volume 90 l. and 69 l. 23 % more or 21 l.
      Each tandem case fluid volume 105 l. and 57 l. 46 % more or 48 l.
      Front axle standard operating weight 6028 kg and 4453 kg 26 % more or 1575 kg
      Rear axle standard operating weight 13360 kg and 11582 kg 13 % more or 1778 kg

      Motor

      Effective speeds output 7-8 175.2 kW and 162.6 kW 7 % more or 12.6 kW
      Maximum power 175.2 kW and 162.6 kW 7 % more or 12.6 kW
      Displacement 10.8 l. and 6.7 l. 38 % more or 4.1 l.

      Hydraulic system

      Pump flow rate 183 l/min and 200 l/min 8 % less or 17 l/min

      Front Axle

      Clearance 698 mm and 620 mm 11 % more or 78 mm

      Dump

      Maximum cutting depth 838.2 mm and 615 mm 27 % more or 223.2 mm

      Circle

      Blade tilt front angle 46 degrees and 40 degrees 13 % more or 6 degrees
      Blade tilt rear angle 13 degrees and 5 degrees 62 % more or 8 degrees

      7 reasons to buy Komatsu GD655-5:

      Operation

      Transmission fluid volume 45 l. and 38 l. 16 % more or 7 l.
      Fuel Capacity 416 l. and 378.5 l. 9 % more or 37.5 l.

      Gear box

      Maximum forward speed 44.3 km/h and 38.3 km/h 14 % more or 6.0 km/h
      Maximum reverse gear 40.2 km/h and 27.4 km/h 32 % more or 12.8 km/h

      Circle

      Right maximum radius outside tyres 1940 mm and 2298.7 mm 16 % less or 358.7 mm
      Maximum lifting above ground level 480 mm and 431.8 mm 10 % more or 48.2 mm
      Maximum radius outside left tyres 1940 mm and 2311.4 mm 16 % less or 371.4 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Height to cab upper part 3200 mm and 3200 mm
      Dimensional length 8687 mm and 9205 mm
      Between tyres width 2794 mm and 2485 mm
      Wheelbase 6248 mm and 6480 mm
      Blade base 2718 mm and 2580 mm

      Operation

      Tyre size 16.00 x 24, G-2 and 17.5R25
      Overall standard operating weight 19388 kg and 16035 kg

      Motor

      Manufacturer Cummins and Komatsu
      Model M11 and SAA6D107E-1
      Power measured at 2100 rev / min and 2100 rev / min
      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)

      Hydraulic system

      Overflow valve pressure 17236.9 kPa and 20684.3 kPa

      Gear box

      Transmission type powershift transmission and powershift
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 18 degrees and 16 degrees
      General fluctuations 16 degrees and 32 degrees

      Dump

      Mouldboard width 4267.2 mm and 4320 mm
      Mouldboard height 787.4 mm and 660 mm
      Mouldboard thickness 25.4 mm and 22 mm
      Left lateral displacement 673.1 mm and 820 mm
      Lateral right shift 673.1 mm and 820 mm

      Circle

      Diameter 1692 mm and 1530 mm
      Rotating 360 degrees and 360 degrees
      Left shift 762 mm and 590 mm
      Right shift 749.3 mm and 590 mm

      Images

      Sizes

      8. Blade base 2718 mm 8. Blade base 2580 mm
      1. Dimensional length 8687 mm 1. Dimensional length 9205 mm
      2. Between tyres width 2794 mm 2. Between tyres width 2485 mm
      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 6248 mm 4. Wheelbase 6480 mm