vs.

      Volvo G780 VHP vs. Volvo G946

      14 reasons to buy Volvo G780 VHP:

      Operation

      Front axle standard operating weight 6028 kg and 5000 kg 17 % more or 1028 kg
      Rear axle standard operating weight 13360 kg and 12300 kg 8 % more or 1060 kg
      Cooling system fluid volume 50 l. and 34 l. 32 % more or 16 l.
      Each tandem case fluid volume 105 l. and 100 l. 5 % more or 5 l.

      Motor

      Power measured at 2100 rev / min and 1800 rev / min 14 % more or 300 rev
      Effective speeds output 7-8 175.2 kW and 167.8 kW 4 % more or 7.4 kW
      Maximum power 175.2 kW and 167.8 kW 4 % more or 7.4 kW
      Effective drives torque 7-8 1145.7 Nm and 1023 Nm 11 % more or 122.7 Nm
      Displacement 10.8 l. and 7.2 l. 33 % more or 3.6 l.

      Hydraulic system

      Pump flow rate 183 l/min and 208 l/min 12 % less or 25 l/min

      Front Axle

      Clearance 698 mm and 610 mm 13 % more or 88 mm

      Dump

      Maximum cutting depth 838.2 mm and 790 mm 6 % more or 48.2 mm

      Circle

      Blade tilt front angle 46 degrees and 45 degrees 2 % more or 1 degrees
      Blade tilt rear angle 13 degrees and 6 degrees 54 % more or 7 degrees

      10 reasons to buy Volvo G946:

      Operation

      Fuel Capacity 404 l. and 378.5 l. 6 % more or 25.5 l.
      Hydraulic system fluid volume 144 l. and 90 l. 37 % more or 54 l.
      Transmission fluid volume 61 l. and 38 l. 38 % more or 23 l.
      Generator current strength 80 amperes and 75 amperes 6 % more or 5 amperes

      Motor

      Torque measured at 1500 rev / min and 1300 rev / min 13 % more or 200 rev

      Gear box

      Maximum reverse gear 32 km/h and 27.4 km/h 14 % more or 4.6 km/h
      Maximum forward speed 45.4 km/h and 38.3 km/h 16 % more or 7.1 km/h

      Dump

      Blade pulling at maximum weight 16671 kg and 12023.4 kg 28 % more or 4647.6 kg

      Circle

      Maximum radius outside left tyres 2020 mm and 2311.4 mm 13 % less or 291.4 mm
      Right maximum radius outside tyres 2010 mm and 2298.7 mm 13 % less or 288.7 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 23 degrees

      Sizes

      Height to cab upper part 3200 mm and 3225 mm
      Dimensional length 8687 mm and 9150 mm
      Between tyres width 2794 mm and 2537 mm
      Wheelbase 6248 mm and 6280 mm
      Blade base 2718 mm and 2650 mm

      Operation

      Overall standard operating weight 19388 kg and 17300 kg
      Tyre size 16.00 x 24, G-2 and 14:00 x 24, G-2
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer Cummins and Volvo
      Model M11 and D7E

      Hydraulic system

      Type of pump hydraulic system with load sensing and axial piston pump
      Overflow valve pressure 17236.9 kPa and 20684.3 kPa

      Gear box

      Transmission type powershift transmission and HTE 840, Sequential direct drive gearbox with shifting under load Volvo
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 16 degrees and 16 degrees

      Dump

      Mouldboard width 4267.2 mm and 3657.6 mm
      Mouldboard height 787.4 mm and 635 mm
      Mouldboard thickness 25.4 mm and 22 mm
      Left lateral displacement 673.1 mm and 673 mm
      Lateral right shift 673.1 mm and 673 mm
      Lowered blade pressure 10652.6 kg and 8650 kg

      Circle

      Diameter 1692 mm and 1626 mm
      Left shift 762 mm and 775 mm
      Right shift 749.3 mm and 749 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8687 mm 1. Dimensional length 9150 mm
      2. Between tyres width 2794 mm 2. Between tyres width 2537 mm
      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3225 mm
      4. Wheelbase 6248 mm 4. Wheelbase 6280 mm
      8. Blade base 2718 mm 8. Blade base 2650 mm