vs.

      Volvo G780 vs. Case 885B DHP

      11 reasons to buy Volvo G780:

      Operation

      Each tandem case fluid volume 105 l. and 60.2 l. 43 % more or 44.8 l.
      Front axle standard operating weight 6028 kg and 5668.1 kg 6 % more or 359.9 kg
      Rear axle standard operating weight 13360 kg and 12687 kg 5 % more or 673 kg
      Fuel Capacity 378.5 l. and 340.7 l. 10 % more or 37.8 l.
      Cooling system fluid volume 50 l. and 39.7 l. 21 % more or 10.3 l.
      Transmission fluid volume 38 l. and 22 l. 42 % more or 16 l.

      Motor

      Effective drives torque 7-8 1030.4 Nm and 984.3 Nm 4 % more or 46.1 Nm
      Displacement 10.8 l. and 6.7 l. 38 % more or 4.1 l.

      Hydraulic system

      Pump flow rate 183 l/min and 185.5 l/min 1 % less or 2.5 l/min

      Front Axle

      Clearance 698 mm and 622 mm 11 % more or 76 mm

      Dump

      Maximum cutting depth 838.2 mm and 711.2 mm 15 % more or 127.0 mm

      8 reasons to buy Case 885B DHP:

      Operation

      Generator current strength 90 amperes and 75 amperes 17 % more or 15 amperes
      Hydraulic system fluid volume 179.8 l. and 90 l. 50 % more or 89.8 l.
      Rear differential/final drive fluid volume 39.7 l. and 34 l. 14 % more or 5.7 l.

      Motor

      Effective speeds output 7-8 159.6 kW and 156.6 kW 2 % more or 3.0 kW
      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Gear box

      Maximum forward speed 43 km/h and 38.3 km/h 11 % more or 4.7 km/h
      Maximum reverse gear 30.6 km/h and 27.4 km/h 10 % more or 3.2 km/h

      Circle

      Maximum lifting above ground level 444.5 mm and 431.8 mm 3 % more or 12.7 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Height to cab upper part 3200 mm and 3340 mm
      Dimensional length 8687 mm and 8534 mm
      Between tyres width 2794 mm and 2650 mm
      Wheelbase 6248 mm and 6219 mm
      Blade base 2718 mm and 2562 mm

      Operation

      Tyre size 16.00 x 24, G-2 and 20.5-25
      Operating voltage 24 V and 24 V
      Overall standard operating weight 19388 kg and 18355.1 kg

      Motor

      Model M11 and FPT 6.7L
      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer Cummins and Case

      Hydraulic system

      Type of pump hydraulic system with load sensing and load sensing, pressure control, with locking in the middle position

      Gear box

      Transmission type powershift transmission and powershift
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 16 degrees and 15.3 degrees

      Dump

      Mouldboard height 787.4 mm and 600 mm
      Mouldboard thickness 25.4 mm and 22.2 mm
      Left lateral displacement 673.1 mm and 533.4 mm
      Mouldboard width 4267.2 mm and 4267.2 mm
      Lateral right shift 673.1 mm and 685.8 mm
      Lowered blade pressure 10652.6 kg and 9606.2 kg

      Circle

      Rotating 360 degrees and 360 degrees
      Diameter 1692 mm and 1752.6 mm

      Images

      Sizes

      1. Dimensional length 8687 mm 1. Dimensional length 8534 mm
      2. Between tyres width 2794 mm 2. Between tyres width 2650 mm
      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 6248 mm 4. Wheelbase 6219 mm
      8. Blade base 2718 mm 8. Blade base 2562 mm