vs.

      Volvo G780 vs. Caterpillar 160M2

      9 reasons to buy Volvo G780:

      Operation

      Each tandem case fluid volume 105 l. and 64 l. 39 % more or 41 l.
      Front axle standard operating weight 6028 kg and 4236.1 kg 30 % more or 1791.9 kg
      Rear axle standard operating weight 13360 kg and 13059.8 kg 2 % more or 300.2 kg

      Hydraulic system

      Pump flow rate 183 l/min and 210.1 l/min 13 % less or 27.1 l/min

      Front Axle

      Clearance 698 mm and 600 mm 14 % more or 98 mm

      Dump

      Maximum cutting depth 838.2 mm and 750 mm 11 % more or 88.2 mm
      Blade pulling at maximum weight 12023.4 kg and 9091.8 kg 24 % more or 2931.6 kg

      Circle

      Blade tilt front angle 46 degrees and 40 degrees 13 % more or 6 degrees
      Blade tilt rear angle 13 degrees and 5 degrees 62 % more or 8 degrees

      14 reasons to buy Caterpillar 160M2:

      Operation

      Transmission fluid volume 65.1 l. and 38 l. 42 % more or 27.1 l.
      Generator current strength 150 amperes and 75 amperes 50 % more or 75 amperes
      Fuel Capacity 416.4 l. and 378.5 l. 9 % more or 37.9 l.
      Cooling system fluid volume 56 l. and 50 l. 11 % more or 6 l.
      Hydraulic system fluid volume 99.9 l. and 90 l. 10 % more or 9.9 l.

      Motor

      Effective drives torque 7-8 1355.8 Nm and 1030.4 Nm 24 % more or 325.4 Nm
      Torque measured at 2100 rev / min and 1300 rev / min 38 % more or 800 rev
      Effective speeds output 7-8 181.2 kW and 156.6 kW 14 % more or 24.6 kW

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 46.7 km/h and 38.3 km/h 18 % more or 8.4 km/h
      Maximum reverse gear 36.9 km/h and 27.4 km/h 26 % more or 9.5 km/h

      Circle

      Maximum radius outside left tyres 2090 mm and 2311.4 mm 10 % less or 221.4 mm
      Right maximum radius outside tyres 2278 mm and 2298.7 mm 1 % less or 20.7 mm
      Maximum lifting above ground level 452 mm and 431.8 mm 4 % more or 20.2 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 20 degrees

      Sizes

      Dimensional length 8687 mm and 8898 mm
      Between tyres width 2794 mm and 2581 mm
      Wheelbase 6248 mm and 6126 mm
      Height to cab upper part 3200 mm and 3287 mm
      Blade base 2718 mm and 2557 mm

      Operation

      Operating voltage 24 V and 24 V
      Overall standard operating weight 19388 kg and 17295.9 kg

      Motor

      Model M11 and C9.3 ACERT VHP
      Power measured at 2100 rev / min and 2100 rev / min
      Manufacturer Cummins and Caterpillar

      Hydraulic system

      Overflow valve pressure 17236.9 kPa and 24152.3 kPa
      Type of pump hydraulic system with load sensing and variable displacement piston pump

      Gear box

      Forward gears number 8 and 8
      Transmission type powershift transmission and Powershift transmission with direct drive

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 16 degrees and 32 degrees

      Dump

      Mouldboard thickness 25.4 mm and 22 mm
      Mouldboard width 4267.2 mm and 4267.2 mm
      Left lateral displacement 673.1 mm and 510 mm
      Mouldboard height 787.4 mm and 609.6 mm
      Lateral right shift 673.1 mm and 660 mm
      Lowered blade pressure 10652.6 kg and 10380 kg

      Circle

      Diameter 1692 mm and 1530 mm
      Rotating 360 degrees and 360 degrees
      Left shift 762 mm and 695 mm
      Right shift 749.3 mm and 728 mm

      Images

      Sizes

      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3287 mm
      4. Wheelbase 6248 mm 4. Wheelbase 6126 mm
      8. Blade base 2718 mm 8. Blade base 2557 mm
      1. Dimensional length 8687 mm 1. Dimensional length 8898 mm
      2. Between tyres width 2794 mm 2. Between tyres width 2581 mm