vs.

      Volvo G780B vs. John Deere 670CH

      15 reasons to buy Volvo G780B:

      Operation

      Hydraulic system fluid volume 134 l. and 59 l. 56 % more or 75 l.
      Fuel Capacity 454 l. and 403 l. 11 % more or 51 l.
      Each tandem case fluid volume 105 l. and 75 l. 29 % more or 30 l.
      Front axle standard operating weight 5825 kg and 3919 kg 33 % more or 1906 kg
      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes
      Rear axle standard operating weight 13733 kg and 10004 kg 27 % more or 3729 kg

      Motor

      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Torque measured at 1100 rev / min and 1000 rev / min 9 % more or 100 rev
      Effective speeds output 7-8 181.2 kW and 138 kW 24 % more or 43.2 kW
      Maximum power 181.2 kW and 138 kW 24 % more or 43.2 kW
      Effective drives torque 7-8 1147 Nm and 847.4 Nm 26 % more or 299.6 Nm
      Displacement 9.6 l. and 6.8 l. 29 % more or 2.8 l.

      Front Axle

      Clearance 698 mm and 610 mm 13 % more or 88 mm

      Dump

      Blade pulling at maximum weight 12359.5 kg and 11080.4 kg 10 % more or 1279.1 kg

      Circle

      Blade tilt rear angle 13 degrees and 5 degrees 62 % more or 8 degrees

      10 reasons to buy John Deere 670CH:

      Operation

      Cooling system fluid volume 42 l. and 31 l. 26 % more or 11 l.
      Rear differential/final drive fluid volume 36 l. and 34 l. 6 % more or 2 l.

      Hydraulic system

      Pump flow rate 173 l/min and 284 l/min 39 % less or 111 l/min

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum forward speed 40.2 km/h and 38.3 km/h 5 % more or 1.9 km/h
      Maximum reverse gear 40.2 km/h and 27.4 km/h 32 % more or 12.8 km/h

      Circle

      Maximum radius outside left tyres 2160 mm and 2311.4 mm 7 % less or 151.4 mm
      Right maximum radius outside tyres 2110 mm and 2298.7 mm 8 % less or 188.7 mm
      Maximum lifting above ground level 444 mm and 431.8 mm 3 % more or 12.2 mm
      Blade tilt front angle 49 degrees and 46 degrees 6 % more or 3 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Wheelbase 6248 mm and 5970 mm
      Blade base 2718 mm and 2670 mm
      Height to cab upper part 3200 mm and 3100 mm
      Dimensional length 9322 mm and 8580 mm
      Between tyres width 2794 mm and 2460 mm

      Operation

      Transmission fluid volume 38 l. and 38 l.
      Tyre size 16.00 x 24, G-2 and 13.00-24
      Operating voltage 24 V and 24 V
      Overall standard operating weight 19618 kg and 13923 kg

      Motor

      Manufacturer Volvo and John Deere
      Model D10BGAE2 and 6068H
      Cylinders number 6 and 6
      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)

      Hydraulic system

      Type of pump hydraulic system with load sensing and CLosed Center variable displacement piston pump
      Overflow valve pressure 18615.8 kPa and 17581.6 kPa

      Gear box

      Transmission type powershift transmission and powershift
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 16 degrees and 32 degrees

      Dump

      Lateral right shift 673.1 mm and 683 mm
      Left lateral displacement 673.1 mm and 683 mm
      Mouldboard width 4267.2 mm and 3.7 mm
      Mouldboard height 787.4 mm and 610 mm
      Mouldboard thickness 25.4 mm and 22 mm

      Circle

      Diameter 1692 mm and 1520 mm
      Rotating 360 degrees and 360 degrees
      Left shift 762 mm and 787 mm
      Right shift 749.3 mm and 724 mm

      Images

      Sizes

      1. Dimensional length 9322 mm 1. Dimensional length 8580 mm
      2. Between tyres width 2794 mm 2. Between tyres width 2460 mm
      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3100 mm
      4. Wheelbase 6248 mm 4. Wheelbase 5970 mm
      8. Blade base 2718 mm 8. Blade base 2670 mm