- Home/
- Comparison/
- Grader/
- Volvo G780B vs. John Deere 772B
Volvo G780B vs. John Deere 772B
14 reasons to buy Volvo G780B:
Operation
Front axle standard operating weight | 5825 kg and 4263.8 kg | 27 % more or 1561.2 kg |
Rear axle standard operating weight | 13733 kg and 10455.3 kg | 24 % more or 3277.7 kg |
Fuel Capacity | 454 l. and 340.7 l. | 25 % more or 113.3 l. |
Cooling system fluid volume | 31 l. and 26.5 l. | 15 % more or 4.5 l. |
Hydraulic system fluid volume | 134 l. and 87.1 l. | 35 % more or 46.9 l. |
Each tandem case fluid volume | 105 l. and 18.9 l. | 82 % more or 86.1 l. |
Generator current strength | 80 amperes and 42 amperes | 47 % more or 38 amperes |
Motor
Displacement | 9.6 l. and 7.6 l. | 21 % more or 2.0 l. |
Effective speeds output 7-8 | 181.2 kW and 115.6 kW | 36 % more or 65.6 kW |
Maximum power | 181.2 kW and 115.6 kW | 36 % more or 65.6 kW |
Effective drives torque 7-8 | 1147 Nm and 650.8 Nm | 43 % more or 496.2 Nm |
Gear box
Maximum reverse gear | 27.4 km/h and 13.8 km/h | 50 % more or 13.6 km/h |
Front Axle
Clearance | 698 mm and 572 mm | 18 % more or 126 mm |
Circle
Blade tilt rear angle | 13 degrees and 5 degrees | 62 % more or 8 degrees |
8 reasons to buy John Deere 772B:
Motor
Power measured at | 2200 rev / min and 2100 rev / min | 5 % more or 100 rev |
Torque measured at | 1400 rev / min and 1100 rev / min | 21 % more or 300 rev |
Hydraulic system
Pump flow rate | 198.4 l/min and 284 l/min | 30 % less or 85.6 l/min |
Gear box
Maximum forward speed | 40.6 km/h and 38.3 km/h | 6 % more or 2.3 km/h |
Circle
Maximum radius outside left tyres | 2160 mm and 2311.4 mm | 7 % less or 151.4 mm |
Right maximum radius outside tyres | 2110 mm and 2298.7 mm | 8 % less or 188.7 mm |
Maximum lifting above ground level | 470 mm and 431.8 mm | 8 % more or 38.2 mm |
Blade tilt front angle | 49 degrees and 46 degrees | 6 % more or 3 degrees |
Neutral reasons:
Steerage
Left and right hinge connection | 22 degrees and 25 degrees |
Sizes
Height to cab upper part | 3200 mm and 3090 mm |
Dimensional length | 9322 mm and 8510 mm |
Between tyres width | 2794 mm and 2440 mm |
Wheelbase | 6248 mm and 5970 mm |
Blade base | 2718 mm and 2670 mm |
Operation
Overall standard operating weight | 19618 kg and 14719.1 kg |
Tyre size | 16.00 x 24, G-2 and 14.00-24 |
Operating voltage | 24 V and 24 V |
Motor
Aspiration | turbocharging and turbocharging |
Manufacturer | Volvo and John Deere |
Model | D10BGAE2 and 6466T |
Cylinders number | 6 and 6 |
Hydraulic system
Type of pump | hydraulic system with load sensing and Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume |
Gear box
Transmission type | powershift transmission and powershift |
Reverse gears number | 4 and 4 |
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 18 degrees and 20 degrees |
General fluctuations | 16 degrees and 32 degrees |
Dump
Lateral right shift | 673.1 mm and 683 mm |
Mouldboard width | 4267.2 mm and 3657.6 mm |
Mouldboard height | 787.4 mm and 609.6 mm |
Mouldboard thickness | 25.4 mm and 22.4 mm |
Left lateral displacement | 673.1 mm and 683 mm |
Circle
Left shift | 762 mm and 787 mm |
Right shift | 749.3 mm and 724 mm |
Diameter | 1692 mm and 1520 mm |
Rotating | 360 degrees and 360 degrees |
Images
Sizes
1. Dimensional length | 9322 mm | 1. Dimensional length | 8510 mm |
2. Between tyres width | 2794 mm | 2. Between tyres width | 2440 mm |
3. Height to cab upper part | 3200 mm | 3. Height to cab upper part | 3090 mm |
4. Wheelbase | 6248 mm | 4. Wheelbase | 5970 mm |
8. Blade base | 2718 mm | 8. Blade base | 2670 mm |