vs.

      Volvo G780B vs. John Deere 872D

      15 reasons to buy Volvo G780B:

      Operation

      Hydraulic system fluid volume 134 l. and 53 l. 60 % more or 81 l.
      Transmission fluid volume 38 l. and 22.7 l. 40 % more or 15.3 l.
      Front axle standard operating weight 5825 kg and 4613 kg 21 % more or 1212 kg
      Rear axle standard operating weight 13733 kg and 11812 kg 14 % more or 1921 kg
      Each tandem case fluid volume 105 l. and 75.7 l. 28 % more or 29.3 l.
      Fuel Capacity 454 l. and 401.2 l. 12 % more or 52.8 l.

      Motor

      Displacement 9.6 l. and 8.1 l. 16 % more or 1.5 l.
      Effective speeds output 7-8 181.2 kW and 175.2 kW 3 % more or 6.0 kW
      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Torque measured at 1100 rev / min and 1000 rev / min 9 % more or 100 rev

      Front Axle

      Clearance 698 mm and 587 mm 16 % more or 111 mm

      Circle

      Blade tilt front angle 46 degrees and 42 degrees 9 % more or 4 degrees
      Blade tilt rear angle 13 degrees and 5 degrees 62 % more or 8 degrees
      Maximum radius outside left tyres 2311.4 mm and 2320 mm 0 % less or 8.6 mm
      Right maximum radius outside tyres 2298.7 mm and 2310 mm 0 % less or 11.3 mm

      11 reasons to buy John Deere 872D:

      Operation

      Cooling system fluid volume 49.2 l. and 31 l. 37 % more or 18.2 l.
      Rear differential/final drive fluid volume 36 l. and 34 l. 6 % more or 2 l.
      Generator current strength 100 amperes and 80 amperes 20 % more or 20 amperes

      Motor

      Effective drives torque 7-8 1277 Nm and 1147 Nm 10 % more or 130 Nm
      Maximum power 182.7 kW and 181.2 kW 1 % more or 1.5 kW

      Hydraulic system

      Pump flow rate 207 l/min and 284 l/min 27 % less or 77 l/min

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum forward speed 41.1 km/h and 38.3 km/h 7 % more or 2.8 km/h
      Maximum reverse gear 41.1 km/h and 27.4 km/h 33 % more or 13.7 km/h

      Dump

      Blade pulling at maximum weight 19849 kg and 12359.5 kg 38 % more or 7489.5 kg

      Circle

      Maximum lifting above ground level 437 mm and 431.8 mm 1 % more or 5.2 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 22 degrees

      Sizes

      Wheelbase 6248 mm and 6120 mm
      Blade base 2718 mm and 2533 mm
      Height to cab upper part 3200 mm and 3180 mm
      Dimensional length 9322 mm and 8804 mm
      Between tyres width 2794 mm and 2640 mm

      Operation

      Overall standard operating weight 19618 kg and 16421 kg
      Tyre size 16.00 x 24, G-2 and 17.5R25 Radial PR
      Operating voltage 24 V and 24 V

      Motor

      Cylinders number 6 and 6
      Aspiration turbocharging and Turbocharged engine with subsequent cooling of charging air by oncoming air flow
      Manufacturer Volvo and John Deere
      Model D10BGAE2 and 6081H

      Hydraulic system

      Type of pump hydraulic system with load sensing and variable displacement piston pump
      Overflow valve pressure 18615.8 kPa and 18960.6 kPa

      Gear box

      Transmission type powershift transmission and Powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 16 degrees and 32 degrees

      Dump

      Left lateral displacement 673.1 mm and 680 mm
      Lateral right shift 673.1 mm and 680 mm
      Mouldboard width 4267.2 mm and 4300 mm
      Mouldboard height 787.4 mm and 686 mm
      Mouldboard thickness 25.4 mm and 25 mm

      Circle

      Diameter 1692 mm and 1520 mm
      Rotating 360 degrees and 360 degrees
      Left shift 762 mm and 787 mm
      Right shift 749.3 mm and 724 mm

      Images

      Sizes

      1. Dimensional length 9322 mm 1. Dimensional length 8804 mm
      2. Between tyres width 2794 mm 2. Between tyres width 2640 mm
      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3180 mm
      4. Wheelbase 6248 mm 4. Wheelbase 6120 mm
      8. Blade base 2718 mm 8. Blade base 2533 mm