vs.

      Volvo G80 vs. Case 845B DHP

      5 reasons to buy Volvo G80:

      Steerage

      Turn radius 5 m and 7.3 m 32 % less or 2.3 m

      Operation

      Each tandem case fluid volume 68 l. and 60.2 l. 11 % more or 7.8 l.

      Motor

      Power measured at 2500 rev / min and 2200 rev / min 12 % more or 300 rev

      Hydraulic system

      Pump flow rate 91 l/min and 185.5 l/min 51 % less or 94.5 l/min

      Gear box

      Maximum reverse gear 32 km/h and 28.5 km/h 11 % more or 3.5 km/h

      11 reasons to buy Case 845B DHP:

      Operation

      Rear differential/final drive fluid volume 39.7 l. and 17 l. 57 % more or 22.7 l.
      Front axle standard operating weight 4496 kg and 2270 kg 50 % more or 2226 kg
      Rear axle standard operating weight 10109.2 kg and 4530 kg 55 % more or 5579.2 kg
      Fuel Capacity 340.7 l. and 148 l. 57 % more or 192.7 l.
      Cooling system fluid volume 39.7 l. and 17 l. 57 % more or 22.7 l.
      Hydraulic system fluid volume 179.8 l. and 114 l. 37 % more or 65.8 l.

      Motor

      Effective speeds output 7-8 119.3 kW and 63.4 kW 47 % more or 55.9 kW
      Cylinders number 6 and 4 33 % more or 2
      Displacement 6.7 l. and 3.9 l. 42 % more or 2.8 l.

      Gear box

      Maximum forward speed 42.8 km/h and 32 km/h 25 % more or 10.8 km/h

      Dump

      Maximum cutting depth 711.2 mm and 203 mm 71 % more or 508.2 mm

      Neutral reasons:

      Sizes

      Dimensional length 6350 mm and 8534.4 mm
      Between tyres width 2362 mm and 2499 mm
      Wheelbase 4674 mm and 6219 mm
      Blade base 1880 mm and 2562 mm

      Operation

      Tyre size 15X19.5, TL, G-2 and 14.0 x 24-10 PR
      Overall standard operating weight 6800 kg and 14605.2 kg

      Motor

      Manufacturer Cummins and Case
      Model 4B3.9 and FPT 6.7L

      Hydraulic system

      Type of pump single stream and piston type with load sensing

      Gear box

      Transmission type hydrostatic and Powershift transmission with direct drive

      Front Axle

      Wheel tilt 15 degrees and 20 degrees
      General fluctuations 35 degrees and 15.3 degrees

      Dump

      Mouldboard width 3048 mm and 3657.6 mm
      Mouldboard height 482.6 mm and 558.8 mm
      Mouldboard thickness 15.9 mm and 22 mm
      Left lateral displacement 1473.2 mm and 533.4 mm
      Lateral right shift 1473.2 mm and 685.8 mm

      Circle

      Rotating 120 degrees and 360 degrees
      Diameter 990.6 mm and 1752.6 mm

      Images

      Sizes

      1. Dimensional length 6350 mm 1. Dimensional length 8534.4 mm
      2. Between tyres width 2362 mm 2. Between tyres width 2499 mm
      4. Wheelbase 4674 mm 4. Wheelbase 6219 mm
      8. Blade base 1880 mm 8. Blade base 2562 mm