vs.

      Volvo G80 vs. Caterpillar 163H

      3 reasons to buy Volvo G80:

      Steerage

      Turn radius 5 m and 7.5 m 33 % less or 2.5 m

      Operation

      Hydraulic system fluid volume 114 l. and 80 l. 30 % more or 34 l.

      Hydraulic system

      Pump flow rate 91 l/min and 206 l/min 56 % less or 115 l/min

      14 reasons to buy Caterpillar 163H:

      Operation

      Front axle standard operating weight 4589 kg and 2270 kg 51 % more or 2319 kg
      Rear axle standard operating weight 11691 kg and 4530 kg 61 % more or 7161 kg
      Fuel Capacity 397 l. and 148 l. 63 % more or 249 l.
      Cooling system fluid volume 38 l. and 17 l. 55 % more or 21 l.
      Rear differential/final drive fluid volume 47 l. and 17 l. 64 % more or 30 l.
      Each tandem case fluid volume 80 l. and 68 l. 15 % more or 12 l.

      Motor

      Displacement 10.3 l. and 3.9 l. 62 % more or 6.4 l.
      Effective speeds output 1-2 134 kW and 63.4 kW 53 % more or 70.6 kW
      Effective speeds output 7-8 164.1 kW and 63.4 kW 61 % more or 100.7 kW
      Maximum power 164.1 kW and 63.4 kW 61 % more or 100.7 kW

      Gear box

      Maximum forward speed 43.6 km/h and 32 km/h 27 % more or 11.6 km/h
      Maximum reverse gear 34.4 km/h and 32 km/h 7 % more or 2.4 km/h

      Front Axle

      Clearance 625 mm and 406 mm 35 % more or 219 mm

      Dump

      Maximum cutting depth 770 mm and 203 mm 74 % more or 567 mm

      Neutral reasons:

      Sizes

      Dimensional length 6350 mm and 8713 mm
      Between tyres width 2362 mm and 2553 mm
      Wheelbase 4674 mm and 6169 mm
      Blade base 1880 mm and 2518 mm

      Operation

      Overall standard operating weight 6800 kg and 16280 kg

      Motor

      Manufacturer Cummins and Caterpillar
      Model 4B3.9 and 3176C DITA ATAAC VHP

      Hydraulic system

      Type of pump single stream and axial piston
      Overflow valve pressure 12410.6 kPa and 24150 kPa

      Gear box

      Transmission type hydrostatic and powershift transmission with direct drive

      Front Axle

      Wheel tilt 15 degrees and 18 degrees
      General fluctuations 35 degrees and 32 degrees

      Dump

      Mouldboard width 3048 mm and 4267 mm
      Mouldboard height 482.6 mm and 686 mm
      Mouldboard thickness 15.9 mm and 25 mm
      Left lateral displacement 1473.2 mm and 851 mm
      Lateral right shift 1473.2 mm and 943 mm

      Circle

      Diameter 990.6 mm and 1530 mm

      Images

      Sizes

      1. Dimensional length 6350 mm 1. Dimensional length 8713 mm
      2. Between tyres width 2362 mm 2. Between tyres width 2553 mm
      4. Wheelbase 4674 mm 4. Wheelbase 6169 mm
      8. Blade base 1880 mm 8. Blade base 2518 mm