vs.

      Volvo G80 vs. John Deere 772D

      4 reasons to buy Volvo G80:

      Steerage

      Turn radius 5 m and 7.2 m 31 % less or 2.2 m

      Operation

      Hydraulic system fluid volume 114 l. and 53 l. 54 % more or 61 l.

      Motor

      Power measured at 2500 rev / min and 2000 rev / min 20 % more or 500 rev

      Hydraulic system

      Pump flow rate 91 l/min and 207 l/min 56 % less or 116 l/min

      14 reasons to buy John Deere 772D:

      Operation

      Front axle standard operating weight 4364 kg and 2270 kg 48 % more or 2094 kg
      Rear axle standard operating weight 11186 kg and 4530 kg 60 % more or 6656 kg
      Fuel Capacity 401.2 l. and 148 l. 63 % more or 253.2 l.
      Cooling system fluid volume 49.2 l. and 17 l. 65 % more or 32.2 l.
      Rear differential/final drive fluid volume 36 l. and 17 l. 53 % more or 19 l.
      Each tandem case fluid volume 75.7 l. and 68 l. 10 % more or 7.7 l.

      Motor

      Maximum power 171.5 kW and 63.4 kW 63 % more or 108.1 kW
      Displacement 8.1 l. and 3.9 l. 52 % more or 4.2 l.
      Effective speeds output 1-2 138 kW and 63.4 kW 54 % more or 74.6 kW
      Effective speeds output 7-8 160.3 kW and 63.4 kW 60 % more or 96.9 kW
      Cylinders number 6 and 4 33 % more or 2

      Gear box

      Maximum forward speed 41.6 km/h and 32 km/h 23 % more or 9.6 km/h
      Maximum reverse gear 41.6 km/h and 32 km/h 23 % more or 9.6 km/h

      Front Axle

      Clearance 587 mm and 406 mm 31 % more or 181 mm

      Neutral reasons:

      Sizes

      Dimensional length 6350 mm and 8804 mm
      Between tyres width 2362 mm and 2510 mm
      Wheelbase 4674 mm and 6120 mm
      Blade base 1880 mm and 2568 mm

      Operation

      Tyre size 15X19.5, TL, G-2 and 14.00R24 Radial PR
      Overall standard operating weight 6800 kg and 15549 kg

      Motor

      Manufacturer Cummins and John Deere
      Model 4B3.9 and 6081H

      Hydraulic system

      Type of pump single stream and variable displacement piston pump
      Overflow valve pressure 12410.6 kPa and 18960.6 kPa

      Gear box

      Transmission type hydrostatic and Powershift transmission with direct drive

      Front Axle

      Wheel tilt 15 degrees and 20 degrees
      General fluctuations 35 degrees and 32 degrees

      Dump

      Mouldboard height 482.6 mm and 610 mm
      Mouldboard thickness 15.9 mm and 22 mm
      Left lateral displacement 1473.2 mm and 680 mm
      Lateral right shift 1473.2 mm and 680 mm
      Mouldboard width 3048 mm and 3660 mm

      Circle

      Diameter 990.6 mm and 1520 mm
      Rotating 120 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 6350 mm 1. Dimensional length 8804 mm
      2. Between tyres width 2362 mm 2. Between tyres width 2510 mm
      4. Wheelbase 4674 mm 4. Wheelbase 6120 mm
      8. Blade base 1880 mm 8. Blade base 2568 mm