- Home/
- Comparison/
- Grader/
- Volvo G930 vs. Caterpillar 24H ES
Volvo G930 vs. Caterpillar 24H ES
4 reasons to buy Volvo G930:
Hydraulic system
Pump flow rate | 208 l/min and 508 l/min | 59 % less or 300 l/min |
Gear box
Forward gears number | 8 and 6 | 25 % more or 2 |
Reverse gears number | 4 and 3 | 25 % more or 1 |
Maximum forward speed | 45.4 km/h and 37.7 km/h | 17 % more or 7.7 km/h |
8 reasons to buy Caterpillar 24H ES:
Steerage
Turn radius | 12 m and 7265 m | 100 % less or 7253 m |
Operation
Hydraulic system fluid volume | 250 l. and 91 l. | 64 % more or 159 l. |
Generator current strength | 100 amperes and 80 amperes | 20 % more or 20 amperes |
Fuel Capacity | 1207 l. and 348 l. | 71 % more or 859 l. |
Motor
Displacement | 27 l. and 7.2 l. | 73 % more or 19.8 l. |
Maximum power | 372.9 kW and 152.1 kW | 59 % more or 220.8 kW |
Gear box
Maximum reverse gear | 36.1 km/h and 32 km/h | 11 % more or 4.1 km/h |
Circle
Maximum lifting above ground level | 634 mm and 492 mm | 22 % more or 142 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 50 degrees and 25 degrees |
Sizes
Height to cab upper part | 3225 mm and 4350 mm |
Dimensional length | 8930 mm and 14160 mm |
Between tyres width | 2537 mm and 4230 mm |
Wheelbase | 6280 mm and 10230 mm |
Blade base | 2675 mm and 4080 mm |
Operation
Tyre size | 14:00 x 24, G-2 and 29.5-29 |
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 15800 kg and 61950 kg |
Motor
Manufacturer | Volvo and Caterpillar |
Model | D7EGCE3 and 3412E HEUI |
Hydraulic system
Overflow valve pressure | 207 kPa and 24131.6 kPa |
Type of pump | axial piston pump and Axial-piston pump |
Front Axle
Wheel tilt | 18 degrees and 18 degrees |
General fluctuations | 16 degrees and 32 degrees |
Dump
Mouldboard height | 635 mm and 1067 mm |
Mouldboard width | 3657.6 mm and 7320 mm |
Mouldboard thickness | 22 mm and 51 mm |
Images
Sizes
1. Dimensional length | 8930 mm | 1. Dimensional length | 14160 mm |
2. Between tyres width | 2537 mm | 2. Between tyres width | 4230 mm |
3. Height to cab upper part | 3225 mm | 3. Height to cab upper part | 4350 mm |
4. Wheelbase | 6280 mm | 4. Wheelbase | 10230 mm |
8. Blade base | 2675 mm | 8. Blade base | 4080 mm |