vs.

      Volvo G930 vs. John Deere 872D

      13 reasons to buy Volvo G930:

      Sizes

      Front part clearance 610 mm and 587 mm 4 % more or 23 mm

      Operation

      Front axle standard operating weight 4700 kg and 4613 kg 2 % more or 87 kg
      Front axle maximum operating weight 7570 kg and 7268 kg 4 % more or 302 kg
      Hydraulic system fluid volume 91 l. and 53 l. 42 % more or 38 l.
      Transmission fluid volume 61 l. and 22.7 l. 63 % more or 38.3 l.
      Each tandem case fluid volume 100 l. and 75.7 l. 24 % more or 24.3 l.

      Motor

      Torque measured at 1550 rev / min and 1000 rev / min 35 % more or 550 rev

      Gear box

      Maximum forward speed 45.4 km/h and 41.1 km/h 9 % more or 4.3 km/h

      Front Axle

      Clearance 610 mm and 587 mm 4 % more or 23 mm

      Circle

      Maximum radius outside left tyres 2020 mm and 2320 mm 13 % less or 300 mm
      Right maximum radius outside tyres 2010 mm and 2310 mm 13 % less or 300 mm
      Maximum lifting above ground level 492 mm and 437 mm 11 % more or 55 mm
      Blade tilt front angle 47 degrees and 42 degrees 11 % more or 5 degrees

      15 reasons to buy John Deere 872D:

      Steerage

      Turn radius 7.2 m and 7265 m 100 % less or 7257.8 m

      Operation

      Rear axle maximum operating weight 14777 kg and 14240 kg 4 % more or 537 kg
      Generator current strength 100 amperes and 80 amperes 20 % more or 20 amperes
      Fuel Capacity 401.2 l. and 348 l. 13 % more or 53.2 l.
      Rear axle standard operating weight 11812 kg and 11100 kg 6 % more or 712 kg
      Cooling system fluid volume 49.2 l. and 31 l. 37 % more or 18.2 l.

      Motor

      Effective drives torque 7-8 1277 Nm and 928 Nm 27 % more or 349 Nm
      Displacement 8.1 l. and 7.2 l. 11 % more or 0.9 l.
      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev
      Effective speeds output 7-8 175.2 kW and 152.1 kW 13 % more or 23.1 kW
      Maximum power 182.7 kW and 152.1 kW 17 % more or 30.6 kW

      Hydraulic system

      Pump flow rate 207 l/min and 208 l/min 0 % less or 1 l/min

      Gear box

      Maximum reverse gear 41.1 km/h and 32 km/h 22 % more or 9.1 km/h
      Reverse gears number 8 and 4 50 % more or 4

      Dump

      Blade pulling at maximum weight 19849 kg and 12816 kg 35 % more or 7033 kg

      Neutral reasons:

      Steerage

      Left and right hinge connection 50 degrees and 22 degrees

      Sizes

      Blade base 2675 mm and 2533 mm
      Height to cab upper part 3225 mm and 3180 mm
      Dimensional length 8930 mm and 8804 mm
      Between tyres width 2537 mm and 2640 mm
      Wheelbase 6280 mm and 6120 mm

      Operation

      Tyre size 14:00 x 24, G-2 and 17.5R25 Radial PR
      Operating voltage 24 V and 24 V
      Total maximum operating weight 19280 kg and 22045 kg
      Overall standard operating weight 15800 kg and 16421 kg

      Motor

      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharged engine with subsequent cooling of charging air by oncoming air flow
      Manufacturer Volvo and John Deere
      Model D7EGCE3 and 6081H
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump axial piston pump and variable displacement piston pump
      Overflow valve pressure 207 kPa and 18960.6 kPa

      Gear box

      Transmission type HTE 840, Sequential direct drive gearbox with shifting under load Volvo and Powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 16 degrees and 32 degrees

      Dump

      Lateral right shift 673 mm and 680 mm
      Mouldboard width 3657.6 mm and 4300 mm
      Mouldboard height 635 mm and 686 mm
      Mouldboard thickness 22 mm and 25 mm
      Left lateral displacement 673 mm and 680 mm

      Circle

      Diameter 1626 mm and 1520 mm
      Rotating 360 degrees and 360 degrees
      Left shift 775 mm and 787 mm
      Right shift 749 mm and 724 mm
      Blade tilt rear angle 5 degrees and 5 degrees

      Images

      Sizes

      1. Dimensional length 8930 mm 1. Dimensional length 8804 mm
      2. Between tyres width 2537 mm 2. Between tyres width 2640 mm
      3. Height to cab upper part 3225 mm 3. Height to cab upper part 3180 mm
      4. Wheelbase 6280 mm 4. Wheelbase 6120 mm
      6. Front part clearance 610 mm 6. Front part clearance 587 mm
      8. Blade base 2675 mm 8. Blade base 2533 mm