vs.

      Volvo G940 vs. Case 865 VHP

      14 reasons to buy Volvo G940:

      Operation

      Transmission fluid volume 61 l. and 23 l. 62 % more or 38 l.
      Each tandem case fluid volume 100 l. and 28.7 l. 71 % more or 71.3 l.
      Front axle standard operating weight 4700 kg and 4293 kg 9 % more or 407 kg
      Rear axle standard operating weight 11700 kg and 10342 kg 12 % more or 1358 kg
      Fuel Capacity 404 l. and 340.7 l. 16 % more or 63.3 l.
      Oil system fluid volume 21.5 l. and 17.8 l. 17 % more or 3.7 l.

      Motor

      Effective speeds output 7-8 167.8 kW and 152.9 kW 9 % more or 14.9 kW
      Maximum power 167.8 kW and 152.9 kW 9 % more or 14.9 kW
      Effective drives torque 7-8 1023 Nm and 881 Nm 14 % more or 142 Nm
      Displacement 7.2 l. and 6.7 l. 7 % more or 0.5 l.
      Torque measured at 1550 rev / min and 1500 rev / min 3 % more or 50 rev

      Gear box

      Maximum forward speed 45.4 km/h and 42.9 km/h 6 % more or 2.5 km/h
      Maximum reverse gear 32 km/h and 28.5 km/h 11 % more or 3.5 km/h

      Dump

      Maximum cutting depth 787.4 mm and 711.2 mm 10 % more or 76.2 mm

      6 reasons to buy Case 865 VHP:

      Steerage

      Turn radius 7.3 m and 7265 m 100 % less or 7257.7 m

      Sizes

      Front part clearance 622 mm and 610 mm 2 % more or 12 mm

      Operation

      Cooling system fluid volume 40 l. and 31 l. 22 % more or 9 l.
      Hydraulic system fluid volume 190 l. and 91 l. 52 % more or 99 l.

      Motor

      Power measured at 2200 rev / min and 1800 rev / min 18 % more or 400 rev

      Hydraulic system

      Pump flow rate 143.5 l/min and 208 l/min 31 % less or 64.5 l/min

      Neutral reasons:

      Sizes

      Height to cab upper part 3225 mm and 3340 mm
      Dimensional length 9150 mm and 8534 mm
      Between tyres width 2537 mm and 2510 mm
      Wheelbase 6280 mm and 6219 mm
      Blade base 2650 mm and 2562 mm

      Operation

      Tyre size 14:00 x 24, G-2 and 14.0 x 24 12PR TL G2 Firestone
      Operating voltage 24 V and 24 V
      Generator current strength 80 amperes and 80 amperes
      Overall standard operating weight 16400 kg and 14635 kg

      Motor

      Cylinders number 6 and 6
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging / air cooling
      Manufacturer Volvo and Cummins
      Model D7E and QSB-6.7, III Level III certified

      Hydraulic system

      Type of pump axial piston pump and Piston pump with locking in the middle position, with load sensing
      Overflow valve pressure 20684.3 kPa and 0 kPa

      Gear box

      Transmission type HTE840, Sequential direct drive gearbox with shifting under load Volvo and direct drive, powershift, camshaft
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      General fluctuations 16 degrees and 19 degrees
      Wheel tilt 18 degrees and 17.5 degrees

      Dump

      Mouldboard height 635 mm and 600 mm
      Mouldboard thickness 22 mm and 22.2 mm
      Left lateral displacement 673 mm and 533 mm
      Lateral right shift 673 mm and 686 mm
      Mouldboard width 3657.6 mm and 3962 mm

      Circle

      Diameter 1626 mm and 1752 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      3. Height to cab upper part 3225 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 6280 mm 4. Wheelbase 6219 mm
      6. Front part clearance 610 mm 6. Front part clearance 622 mm
      8. Blade base 2650 mm 8. Blade base 2562 mm
      1. Dimensional length 9150 mm 1. Dimensional length 8534 mm
      2. Between tyres width 2537 mm 2. Between tyres width 2510 mm