vs.

      Volvo G940 vs. Caterpillar 160M2

      12 reasons to buy Volvo G940:

      Sizes

      Front part clearance 610 mm and 600 mm 2 % more or 10 mm

      Operation

      Each tandem case fluid volume 100 l. and 64 l. 36 % more or 36 l.
      Front axle standard operating weight 4700 kg and 4236.1 kg 10 % more or 463.9 kg
      Front axle maximum operating weight 7570 kg and 6052.3 kg 20 % more or 1517.7 kg

      Hydraulic system

      Pump flow rate 208 l/min and 210.1 l/min 1 % less or 2.1 l/min

      Front Axle

      Clearance 610 mm and 600 mm 2 % more or 10 mm

      Dump

      Maximum cutting depth 787.4 mm and 750 mm 5 % more or 37.4 mm
      Blade pulling at maximum weight 12816 kg and 9091.8 kg 29 % more or 3724.2 kg

      Circle

      Maximum radius outside left tyres 2020 mm and 2090 mm 3 % less or 70 mm
      Right maximum radius outside tyres 2010 mm and 2278 mm 12 % less or 268 mm
      Blade tilt front angle 45 degrees and 40 degrees 11 % more or 5 degrees
      Blade tilt rear angle 6 degrees and 5 degrees 17 % more or 1 degrees

      16 reasons to buy Caterpillar 160M2:

      Steerage

      Turn radius 7.8 m and 7265 m 100 % less or 7257.2 m

      Operation

      Oil system fluid volume 29.9 l. and 21.5 l. 28 % more or 8.4 l.
      Fuel Capacity 416.4 l. and 404 l. 3 % more or 12.4 l.
      Cooling system fluid volume 56 l. and 31 l. 45 % more or 25 l.
      Hydraulic system fluid volume 99.9 l. and 91 l. 9 % more or 8.9 l.
      Transmission fluid volume 65.1 l. and 61 l. 6 % more or 4.1 l.
      Generator current strength 150 amperes and 80 amperes 47 % more or 70 amperes
      Rear axle standard operating weight 13059.8 kg and 11700 kg 10 % more or 1359.8 kg
      Rear axle maximum operating weight 16530.7 kg and 14240 kg 14 % more or 2290.7 kg

      Motor

      Power measured at 2100 rev / min and 1800 rev / min 14 % more or 300 rev
      Torque measured at 2100 rev / min and 1550 rev / min 26 % more or 550 rev
      Effective speeds output 7-8 181.2 kW and 167.8 kW 7 % more or 13.4 kW
      Effective drives torque 7-8 1355.8 Nm and 1023 Nm 25 % more or 332.8 Nm

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 46.7 km/h and 45.4 km/h 3 % more or 1.3 km/h
      Maximum reverse gear 36.9 km/h and 32 km/h 13 % more or 4.9 km/h

      Neutral reasons:

      Sizes

      Height to cab upper part 3225 mm and 3287 mm
      Dimensional length 9150 mm and 8898 mm
      Between tyres width 2537 mm and 2581 mm
      Wheelbase 6280 mm and 6126 mm
      Blade base 2650 mm and 2557 mm

      Operation

      Total maximum operating weight 21320 kg and 23947.4 kg
      Operating voltage 24 V and 24 V
      Overall standard operating weight 16400 kg and 17295.9 kg

      Motor

      Model D7E and C9.3 ACERT VHP
      Cylinders number 6 and 6
      Manufacturer Volvo and Caterpillar

      Hydraulic system

      Type of pump axial piston pump and variable displacement piston pump
      Overflow valve pressure 20684.3 kPa and 24152.3 kPa

      Gear box

      Transmission type HTE840, Sequential direct drive gearbox with shifting under load Volvo and Powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 16 degrees and 32 degrees

      Dump

      Mouldboard width 3657.6 mm and 4267.2 mm
      Mouldboard height 635 mm and 609.6 mm
      Mouldboard thickness 22 mm and 22 mm
      Left lateral displacement 673 mm and 510 mm
      Lateral right shift 673 mm and 660 mm
      Lowered blade pressure 8131 kg and 10380 kg

      Circle

      Left shift 775 mm and 695 mm
      Right shift 749 mm and 728 mm
      Diameter 1626 mm and 1530 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 9150 mm 1. Dimensional length 8898 mm
      2. Between tyres width 2537 mm 2. Between tyres width 2581 mm
      3. Height to cab upper part 3225 mm 3. Height to cab upper part 3287 mm
      4. Wheelbase 6280 mm 4. Wheelbase 6126 mm
      6. Front part clearance 610 mm 6. Front part clearance 600 mm
      8. Blade base 2650 mm 8. Blade base 2557 mm