- Home/
- Comparison/
- Grader/
- Volvo G940 vs. Mitsubishi MG130-E
Volvo G940 vs. Mitsubishi MG130-E
14 reasons to buy Volvo G940:
Operation
Fuel Capacity | 404 l. and 115 l. | 72 % more or 289 l. |
Oil system fluid volume | 21.5 l. and 12 l. | 44 % more or 9.5 l. |
Hydraulic system fluid volume | 91 l. and 67 l. | 26 % more or 24 l. |
Transmission fluid volume | 61 l. and 23 l. | 62 % more or 38 l. |
Each tandem case fluid volume | 100 l. and 26 l. | 74 % more or 74 l. |
Generator current strength | 80 amperes and 30 amperes | 62 % more or 50 amperes |
Motor
Maximum power | 167.8 kW and 70.8 kW | 58 % more or 97.0 kW |
Displacement | 7.2 l. and 4.2 l. | 42 % more or 3.0 l. |
Cylinders number | 6 and 4 | 33 % more or 2 |
Gear box
Forward gears number | 8 and 6 | 25 % more or 2 |
Maximum forward speed | 45.4 km/h and 32.6 km/h | 28 % more or 12.8 km/h |
Front Axle
Clearance | 610 mm and 480 mm | 21 % more or 130 mm |
Circle
Blade tilt front angle | 45 degrees and 40 degrees | 11 % more or 5 degrees |
Blade tilt rear angle | 6 degrees and 5 degrees | 17 % more or 1 degrees |
4 reasons to buy Mitsubishi MG130-E:
Motor
Power measured at | 2300 rev / min and 1800 rev / min | 22 % more or 500 rev |
Hydraulic system
Pump flow rate | 106 l/min and 208 l/min | 49 % less or 102 l/min |
Gear box
Maximum reverse gear | 33.2 km/h and 32 km/h | 4 % more or 1.2 km/h |
Reverse gears number | 6 and 4 | 33 % more or 2 |
Neutral reasons:
Sizes
Height to cab upper part | 3225 mm and 3010 mm |
Dimensional length | 9150 mm and 6910 mm |
Between tyres width | 2537 mm and 2140 mm |
Wheelbase | 6280 mm and 4900 mm |
Blade base | 2650 mm and 2135 mm |
Operation
Overall standard operating weight | 16400 kg and 10060 kg |
Tyre size | 14:00 x 24, G-2 and 10.00-20-12 |
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | Volvo and Mitsubishi |
Model | D7E and SK4-T |
Hydraulic system
Type of pump | axial piston pump and Pump with double gear |
Overflow valve pressure | 20684.3 kPa and 17.2 kPa |
Gear box
Transmission type | HTE840, Sequential direct drive gearbox with shifting under load Volvo and planetary gear |
Front Axle
Wheel tilt | 18 degrees and 20 degrees |
General fluctuations | 16 degrees and 30 degrees |
Dump
Mouldboard width | 3657.6 mm and 3100 mm |
Mouldboard height | 635 mm and 610 mm |
Mouldboard thickness | 22 mm and 19 mm |
Circle
Rotating | 360 degrees and 360 degrees |
Left shift | 775 mm and 1470 mm |
Right shift | 749 mm and 1230 mm |
Images
Sizes
4. Wheelbase | 6280 mm | 4. Wheelbase | 4900 mm |
8. Blade base | 2650 mm | 8. Blade base | 2135 mm |
1. Dimensional length | 9150 mm | 1. Dimensional length | 6910 mm |
2. Between tyres width | 2537 mm | 2. Between tyres width | 2140 mm |
3. Height to cab upper part | 3225 mm | 3. Height to cab upper part | 3010 mm |