vs.

      Volvo G940 vs. New Holland F156.6

      20 reasons to buy Volvo G940:

      Steerage

      Turn radius 7265 m and 8250 m 12 % less or 985 m

      Sizes

      Front part clearance 610 mm and 141 mm 77 % more or 469 mm

      Operation

      Front axle maximum operating weight 7570 kg and 5200 kg 31 % more or 2370 kg
      Fuel Capacity 404 l. and 275 l. 32 % more or 129 l.
      Rear axle maximum operating weight 14240 kg and 11500 kg 19 % more or 2740 kg
      Oil system fluid volume 21.5 l. and 12.5 l. 42 % more or 9.0 l.
      Transmission fluid volume 61 l. and 21 l. 66 % more or 40 l.
      Each tandem case fluid volume 100 l. and 68 l. 32 % more or 32 l.
      Generator current strength 80 amperes and 70 amperes 12 % more or 10 amperes
      Front axle standard operating weight 4700 kg and 4496 kg 4 % more or 204 kg
      Rear axle standard operating weight 11700 kg and 9841 kg 16 % more or 1859 kg

      Motor

      Maximum power 167.8 kW and 130.5 kW 22 % more or 37.3 kW
      Displacement 7.2 l. and 5.9 l. 18 % more or 1.3 l.

      Gear box

      Maximum reverse gear 32 km/h and 27.1 km/h 15 % more or 4.9 km/h
      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1
      Maximum forward speed 45.4 km/h and 37.4 km/h 18 % more or 8.0 km/h

      Dump

      Maximum cutting depth 787.4 mm and 500 mm 36 % more or 287.4 mm

      Circle

      Maximum radius outside left tyres 2020 mm and 2520 mm 20 % less or 500 mm
      Right maximum radius outside tyres 2010 mm and 3210 mm 37 % less or 1200 mm

      4 reasons to buy New Holland F156.6:

      Operation

      Hydraulic system fluid volume 185 l. and 91 l. 51 % more or 94 l.

      Motor

      Power measured at 2100 rev / min and 1800 rev / min 14 % more or 300 rev

      Hydraulic system

      Pump flow rate 126 l/min and 208 l/min 39 % less or 82 l/min

      Front Axle

      Clearance 646 mm and 610 mm 6 % more or 36 mm

      Neutral reasons:

      Sizes

      Dimensional length 9150 mm and 9975 mm
      Between tyres width 2537 mm and 2595 mm
      Wheelbase 6280 mm and 5983 mm
      Blade base 2650 mm and 2504 mm
      Height to cab upper part 3225 mm and 3373 mm

      Operation

      Overall standard operating weight 16400 kg and 14336 kg
      Total maximum operating weight 21320 kg and 16200 kg
      Tyre size 14:00 x 24, G-2 and 17.5R25EM
      Operating voltage 24 V and 24 V

      Motor

      Model D7E and CNH 4-stroke cycle, naturally aspirated diesel engine
      Cylinders number 6 and 6
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging water cooling

      Hydraulic system

      Type of pump axial piston pump and Axial cam pump, variable displacement piston pump
      Overflow valve pressure 20684.3 kPa and 20000 kPa

      Gear box

      Transmission type HTE840, Sequential direct drive gearbox with shifting under load Volvo and powershift transmission

      Front Axle

      Wheel tilt 18 degrees and 21 degrees
      General fluctuations 16 degrees and 15 degrees

      Dump

      Mouldboard height 635 mm and 152 mm
      Mouldboard thickness 22 mm and 19 mm
      Left lateral displacement 673 mm and 645 mm
      Lateral right shift 673 mm and 755 mm
      Mouldboard width 3657.6 mm and 3660 mm

      Circle

      Left shift 775 mm and 645 mm
      Right shift 749 mm and 755 mm
      Rotating 360 degrees and degrees

      Images

      Sizes

      1. Dimensional length 9150 mm 1. Dimensional length 9975 mm
      2. Between tyres width 2537 mm 2. Between tyres width 2595 mm
      3. Height to cab upper part 3225 mm 3. Height to cab upper part 3373 mm
      4. Wheelbase 6280 mm 4. Wheelbase 5983 mm
      6. Front part clearance 610 mm 6. Front part clearance 141 mm
      8. Blade base 2650 mm 8. Blade base 2504 mm