vs.

      Volvo G940 vs. Volvo G960

      1 reasons to buy Volvo G940:

      Motor

      Torque measured at 1550 rev / min and 1500 rev / min 3 % more or 50 rev

      9 reasons to buy Volvo G960:

      Operation

      Front axle standard operating weight 5100 kg and 4700 kg 8 % more or 400 kg
      Rear axle standard operating weight 12450 kg and 11700 kg 6 % more or 750 kg
      Rear axle maximum operating weight 14290 kg and 14240 kg 0 % more or 50 kg
      Cooling system fluid volume 34 l. and 31 l. 9 % more or 3 l.

      Motor

      Effective speeds output 7-8 180.5 kW and 167.8 kW 7 % more or 12.7 kW
      Maximum power 180.5 kW and 167.8 kW 7 % more or 12.7 kW
      Effective drives torque 7-8 1073 Nm and 1023 Nm 5 % more or 50 Nm

      Dump

      Maximum cutting depth 790 mm and 787.4 mm 0 % more or 2.6 mm
      Blade pulling at maximum weight 12861 kg and 12816 kg 0 % more or 45 kg

      Neutral reasons:

      Steerage

      Turn radius 7265 m and 7265 m

      Sizes

      Between tyres width 2537 mm and 2537 mm
      Dimensional length 9150 mm and 9150 mm
      Wheelbase 6280 mm and 6280 mm
      Blade base 2650 mm and 2650 mm
      Height to cab upper part 3225 mm and 3225 mm

      Operation

      Overall standard operating weight 16400 kg and 17550 kg
      Front axle maximum operating weight 7570 kg and 7570 kg
      Total maximum operating weight 21320 kg and 21860 kg
      Fuel Capacity 404 l. and 404 l.
      Oil system fluid volume 21.5 l. and 21.5 l.
      Hydraulic system fluid volume 91 l. and 91 l.
      Transmission fluid volume 61 l. and 61 l.
      Each tandem case fluid volume 100 l. and 100 l.
      Tyre size 14:00 x 24, G-2 and 14:00 x 24, G-2
      Operating voltage 24 V and 24 V
      Generator current strength 80 amperes and 80 amperes

      Motor

      Manufacturer Volvo and Volvo
      Model D7E and D7E
      Power measured at 1800 rev / min and 1800 rev / min
      Cylinders number 6 and 6
      Displacement 7.2 l. and 7.2 l.
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharging with subsequent air cooling (by a cooling radiator)

      Hydraulic system

      Type of pump axial piston pump and axial piston pump
      Pump flow rate 208 l/min and 208 l/min
      Overflow valve pressure 20684.3 kPa and 20684.3 kPa

      Gear box

      Forward gears number 8 and 8
      Reverse gears number 4 and 4
      Transmission type HTE840, Sequential direct drive gearbox with shifting under load Volvo and HTE 840, Sequential direct drive gearbox with shifting under load Volvo
      Maximum forward speed 45.4 km/h and 45.4 km/h
      Maximum reverse gear 32 km/h and 32 km/h

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 16 degrees and 16 degrees
      Clearance 610 mm and 610 mm

      Dump

      Mouldboard height 635 mm and 635 mm
      Mouldboard thickness 22 mm and 22 mm
      Left lateral displacement 673 mm and 673 mm
      Lateral right shift 673 mm and 673 mm
      Lowered blade pressure 8131 kg and 8823 kg
      Mouldboard width 3657.6 mm and 3657.6 mm

      Circle

      Diameter 1626 mm and 1626 mm
      Rotating 360 degrees and 360 degrees
      Left shift 775 mm and 775 mm
      Right shift 749 mm and 749 mm
      Maximum radius outside left tyres 2020 mm and 2020 mm
      Right maximum radius outside tyres 2010 mm and 2010 mm
      Blade tilt front angle 45 degrees and 45 degrees
      Blade tilt rear angle 6 degrees and 6 degrees

      Images

      Sizes

      1. Dimensional length 9150 mm 1. Dimensional length 9150 mm
      2. Between tyres width 2537 mm 2. Between tyres width 2537 mm
      3. Height to cab upper part 3225 mm 3. Height to cab upper part 3225 mm
      4. Wheelbase 6280 mm 4. Wheelbase 6280 mm
      8. Blade base 2650 mm 8. Blade base 2650 mm