- Home/
- Comparison/
- Grader/
- Volvo G960 vs. Caterpillar 160M2
Volvo G960 vs. Caterpillar 160M2
12 reasons to buy Volvo G960:
Sizes
Rear ground clearance | 610 mm and 344 mm | 44 % more or 266 mm |
Operation
Each tandem case fluid volume | 100 l. and 64 l. | 36 % more or 36 l. |
Front axle standard operating weight | 5100 kg and 4236.1 kg | 17 % more or 863.9 kg |
Front axle maximum operating weight | 7570 kg and 6052.3 kg | 20 % more or 1517.7 kg |
Hydraulic system
Pump flow rate | 208 l/min and 210.1 l/min | 1 % less or 2.1 l/min |
Front Axle
Clearance | 610 mm and 600 mm | 2 % more or 10 mm |
Dump
Maximum cutting depth | 790 mm and 750 mm | 5 % more or 40 mm |
Blade pulling at maximum weight | 12861 kg and 9091.8 kg | 29 % more or 3769.2 kg |
Circle
Maximum radius outside left tyres | 2020 mm and 2090 mm | 3 % less or 70 mm |
Right maximum radius outside tyres | 2010 mm and 2278 mm | 12 % less or 268 mm |
Blade tilt front angle | 45 degrees and 40 degrees | 11 % more or 5 degrees |
Blade tilt rear angle | 6 degrees and 5 degrees | 17 % more or 1 degrees |
16 reasons to buy Caterpillar 160M2:
Steerage
Turn radius | 7.8 m and 7265 m | 100 % less or 7257.2 m |
Operation
Oil system fluid volume | 29.9 l. and 21.5 l. | 28 % more or 8.4 l. |
Cooling system fluid volume | 56 l. and 34 l. | 39 % more or 22 l. |
Fuel Capacity | 416.4 l. and 404 l. | 3 % more or 12.4 l. |
Hydraulic system fluid volume | 99.9 l. and 91 l. | 9 % more or 8.9 l. |
Transmission fluid volume | 65.1 l. and 61 l. | 6 % more or 4.1 l. |
Generator current strength | 150 amperes and 80 amperes | 47 % more or 70 amperes |
Rear axle standard operating weight | 13059.8 kg and 12450 kg | 5 % more or 609.8 kg |
Rear axle maximum operating weight | 16530.7 kg and 14290 kg | 14 % more or 2240.7 kg |
Motor
Power measured at | 2100 rev / min and 1800 rev / min | 14 % more or 300 rev |
Torque measured at | 2100 rev / min and 1500 rev / min | 29 % more or 600 rev |
Effective speeds output 7-8 | 181.2 kW and 180.5 kW | 0 % more or 0.7 kW |
Effective drives torque 7-8 | 1355.8 Nm and 1073 Nm | 21 % more or 282.8 Nm |
Gear box
Reverse gears number | 6 and 4 | 33 % more or 2 |
Maximum forward speed | 46.7 km/h and 45.4 km/h | 3 % more or 1.3 km/h |
Maximum reverse gear | 36.9 km/h and 32 km/h | 13 % more or 4.9 km/h |
Neutral reasons:
Steerage
Left and right hinge connection | 23 degrees and 20 degrees |
Sizes
Height to cab upper part | 3225 mm and 3287 mm |
Dimensional length | 9150 mm and 8898 mm |
Between tyres width | 2537 mm and 2581 mm |
Wheelbase | 6280 mm and 6126 mm |
Blade base | 2650 mm and 2557 mm |
Operation
Total maximum operating weight | 21860 kg and 23947.4 kg |
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 17550 kg and 17295.9 kg |
Motor
Manufacturer | Volvo and Caterpillar |
Model | D7E and C9.3 ACERT VHP |
Cylinders number | 6 and 6 |
Hydraulic system
Type of pump | axial piston pump and variable displacement piston pump |
Overflow valve pressure | 20684.3 kPa and 24152.3 kPa |
Gear box
Transmission type | HTE 840, Sequential direct drive gearbox with shifting under load Volvo and Powershift transmission with direct drive |
Forward gears number | 8 and 8 |
Front Axle
General fluctuations | 16 degrees and 32 degrees |
Wheel tilt | 18 degrees and 18 degrees |
Dump
Mouldboard width | 3657.6 mm and 4267.2 mm |
Mouldboard height | 635 mm and 609.6 mm |
Mouldboard thickness | 22 mm and 22 mm |
Left lateral displacement | 673 mm and 510 mm |
Lateral right shift | 673 mm and 660 mm |
Lowered blade pressure | 8823 kg and 10380 kg |
Circle
Diameter | 1626 mm and 1530 mm |
Right shift | 749 mm and 728 mm |
Rotating | 360 degrees and 360 degrees |
Left shift | 775 mm and 695 mm |
Images
Sizes
1. Dimensional length | 9150 mm | 1. Dimensional length | 8898 mm |
2. Between tyres width | 2537 mm | 2. Between tyres width | 2581 mm |
3. Height to cab upper part | 3225 mm | 3. Height to cab upper part | 3287 mm |
4. Wheelbase | 6280 mm | 4. Wheelbase | 6126 mm |
5. Rear ground clearance | 610 mm | 5. Rear ground clearance | 344 mm |
8. Blade base | 2650 mm | 8. Blade base | 2557 mm |