vs.

      Volvo G970 vs. Mitsubishi MG230-E

      12 reasons to buy Volvo G970:

      Operation

      Fuel Capacity 498 l. and 210 l. 58 % more or 288 l.
      Oil system fluid volume 39 l. and 16 l. 59 % more or 23 l.
      Transmission fluid volume 61 l. and 23 l. 62 % more or 38 l.
      Each tandem case fluid volume 100 l. and 28 l. 72 % more or 72 l.
      Generator current strength 80 amperes and 40 amperes 50 % more or 40 amperes

      Motor

      Maximum power 195.4 kW and 85.8 kW 56 % more or 109.6 kW
      Displacement 9.4 l. and 5.9 l. 37 % more or 3.5 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Maximum forward speed 43.8 km/h and 32.6 km/h 26 % more or 11.2 km/h

      Front Axle

      Clearance 590 mm and 480 mm 19 % more or 110 mm

      Circle

      Blade tilt front angle 45 degrees and 40 degrees 11 % more or 5 degrees
      Blade tilt rear angle 6 degrees and 5 degrees 17 % more or 1 degrees

      5 reasons to buy Mitsubishi MG230-E:

      Operation

      Hydraulic system fluid volume 110 l. and 91 l. 17 % more or 19 l.

      Motor

      Power measured at 2500 rev / min and 1700 rev / min 32 % more or 800 rev

      Hydraulic system

      Pump flow rate 110 l/min and 208 l/min 47 % less or 98 l/min

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum reverse gear 33.2 km/h and 30.1 km/h 9 % more or 3.1 km/h

      Neutral reasons:

      Steerage

      Left and right hinge connection 21 degrees and 26 degrees

      Sizes

      Height to cab upper part 3225 mm and 3030 mm
      Dimensional length 9500 mm and 7325 mm
      Between tyres width 2780 mm and 2140 mm
      Wheelbase 6531 mm and 5300 mm
      Blade base 2790 mm and 2185 mm

      Operation

      Overall standard operating weight 18900 kg and 11060 kg
      Tyre size 14:00 x 24, G-2 and 13.00-24-12
      Operating voltage 24 V and 24 V

      Motor

      Model D9B and 6D34-TE1
      Cylinders number 6 and 6
      Manufacturer Volvo and Mitsubishi

      Hydraulic system

      Type of pump axial piston pump and Pump with double gear
      Overflow valve pressure 20684.3 kPa and 17.2 kPa

      Gear box

      Transmission type HTE 840, Sequential direct drive gearbox with shifting under load Volvo and planetary gear

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 16 degrees and 30 degrees

      Dump

      Mouldboard width 3657.6 mm and 3100 mm
      Mouldboard height 737 mm and 610 mm
      Mouldboard thickness 25 mm and 19 mm

      Circle

      Right shift 749 mm and 1680 mm
      Rotating 360 degrees and 360 degrees
      Left shift 775 mm and 1650 mm

      Images

      Sizes

      3. Height to cab upper part 3225 mm 3. Height to cab upper part 3030 mm
      4. Wheelbase 6531 mm 4. Wheelbase 5300 mm
      8. Blade base 2790 mm 8. Blade base 2185 mm
      1. Dimensional length 9500 mm 1. Dimensional length 7325 mm
      2. Between tyres width 2780 mm 2. Between tyres width 2140 mm