vs.

      Volvo G970 vs. New Holland G140

      16 reasons to buy Volvo G970:

      Operation

      Front axle standard operating weight 5300 kg and 3706.8 kg 30 % more or 1593.2 kg
      Each tandem case fluid volume 100 l. and 29.1 l. 71 % more or 70.9 l.
      Rear axle standard operating weight 13600 kg and 9863.8 kg 27 % more or 3736.2 kg
      Fuel Capacity 498 l. and 340.7 l. 32 % more or 157.3 l.
      Cooling system fluid volume 47 l. and 39.7 l. 16 % more or 7.3 l.
      Transmission fluid volume 61 l. and 17.8 l. 71 % more or 43.2 l.

      Motor

      Torque measured at 1550 rev / min and 1500 rev / min 3 % more or 50 rev
      Effective speeds output 7-8 195.4 kW and 119.3 kW 39 % more or 76.1 kW
      Maximum power 195.4 kW and 119.3 kW 39 % more or 76.1 kW
      Effective drives torque 7-8 1188 Nm and 746 Nm 37 % more or 442 Nm
      Displacement 9.4 l. and 6.7 l. 29 % more or 2.7 l.

      Gear box

      Maximum forward speed 43.8 km/h and 42.8 km/h 2 % more or 1.0 km/h
      Maximum reverse gear 30.1 km/h and 28.5 km/h 5 % more or 1.6 km/h

      Circle

      Maximum radius outside left tyres 1970 mm and 1978 mm 0 % less or 8 mm
      Right maximum radius outside tyres 1960 mm and 2174 mm 10 % less or 214 mm
      Blade tilt front angle 45 degrees and 5 degrees 89 % more or 40 degrees

      6 reasons to buy New Holland G140:

      Steerage

      Turn radius 7250 m and 7700 m 6 % less or 450 m

      Operation

      Hydraulic system fluid volume 179.8 l. and 91 l. 49 % more or 88.8 l.

      Motor

      Power measured at 2200 rev / min and 1700 rev / min 23 % more or 500 rev

      Hydraulic system

      Pump flow rate 185.5 l/min and 208 l/min 11 % less or 22.5 l/min

      Front Axle

      Clearance 622 mm and 590 mm 5 % more or 32 mm

      Circle

      Blade tilt rear angle 42 degrees and 6 degrees 86 % more or 36 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 21 degrees and 25 degrees

      Sizes

      Dimensional length 9500 mm and 8521 mm
      Between tyres width 2780 mm and 2510 mm
      Wheelbase 6531 mm and 6219 mm
      Blade base 2790 mm and 2562 mm
      Height to cab upper part 3225 mm and 3140 mm

      Operation

      Tyre size 14:00 x 24, G-2 and 14.00X24 10 layers G2
      Overall standard operating weight 18900 kg and 13570.6 kg
      Operating voltage 24 V and 24 V
      Generator current strength 80 amperes and 80 amperes

      Motor

      Cylinders number 6 and 6
      Manufacturer Volvo and Cummins
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging
      Model D9B and QSB 6.7L

      Hydraulic system

      Overflow valve pressure 20684.3 kPa and 17926.4 kPa
      Type of pump axial piston pump and variable displacement piston pump

      Gear box

      Forward gears number 8 and 8
      Reverse gears number 4 and 4
      Transmission type HTE 840, Sequential direct drive gearbox with shifting under load Volvo and Powershift transmission with direct drive

      Front Axle

      Wheel tilt 18 degrees and 17.5 degrees
      General fluctuations 16 degrees and 19 degrees

      Dump

      Mouldboard height 737 mm and 622 mm
      Mouldboard thickness 25 mm and 22 mm
      Mouldboard width 3657.6 mm and 3657.6 mm
      Left lateral displacement 673 mm and 533 mm
      Lateral right shift 673 mm and 711 mm
      Lowered blade pressure 9253 kg and 6707.7 kg

      Circle

      Diameter 1626 mm and 1753 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      8. Blade base 2790 mm 8. Blade base 2562 mm
      1. Dimensional length 9500 mm 1. Dimensional length 8521 mm
      2. Between tyres width 2780 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3225 mm 3. Height to cab upper part 3140 mm
      4. Wheelbase 6531 mm 4. Wheelbase 6219 mm