vs.

      Volvo G976 vs. Case 865B VHP

      12 reasons to buy Volvo G976:

      Operation

      Front axle standard operating weight 5600 kg and 5501.6 kg 2 % more or 98.4 kg
      Rear axle standard operating weight 14200 kg and 10824.5 kg 24 % more or 3375.5 kg
      Each tandem case fluid volume 100 l. and 60.2 l. 40 % more or 39.8 l.
      Fuel Capacity 498 l. and 340.7 l. 32 % more or 157.3 l.
      Cooling system fluid volume 47 l. and 39.7 l. 16 % more or 7.3 l.

      Motor

      Torque measured at 1550 rev / min and 1500 rev / min 3 % more or 50 rev
      Effective speeds output 7-8 195.4 kW and 152.9 kW 22 % more or 42.5 kW
      Effective drives torque 7-8 1188 Nm and 930.1 Nm 22 % more or 257.9 Nm
      Displacement 9.4 l. and 6.7 l. 29 % more or 2.7 l.

      Gear box

      Maximum forward speed 43.8 km/h and 42.8 km/h 2 % more or 1.0 km/h
      Maximum reverse gear 30.1 km/h and 28.5 km/h 5 % more or 1.6 km/h

      Dump

      Maximum cutting depth 775 mm and 711.2 mm 8 % more or 63.8 mm

      7 reasons to buy Case 865B VHP:

      Steerage

      Turn radius 7.3 m and 7640 m 100 % less or 7632.7 m

      Operation

      Transmission fluid volume 94.6 l. and 61 l. 36 % more or 33.6 l.
      Generator current strength 90 amperes and 80 amperes 11 % more or 10 amperes
      Oil system fluid volume 70 l. and 39 l. 44 % more or 31 l.
      Hydraulic system fluid volume 190 l. and 144 l. 24 % more or 46 l.

      Motor

      Power measured at 2200 rev / min and 1700 rev / min 23 % more or 500 rev

      Hydraulic system

      Pump flow rate 185.5 l/min and 208 l/min 11 % less or 22.5 l/min

      Neutral reasons:

      Steerage

      Left and right hinge connection 21 degrees and 25 degrees

      Sizes

      Between tyres width 2780 mm and 2452 mm
      Dimensional length 9500 mm and 8534 mm
      Wheelbase 6531 mm and 6219 mm
      Blade base 2790 mm and 2562 mm
      Height to cab upper part 3225 mm and 3340 mm

      Operation

      Overall standard operating weight 19800 kg and 16326.2 kg
      Tyre size 14:00 x 24, G-2 and 17.5-25
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Volvo and Case
      Model D9B and FPT 6.7L
      Cylinders number 6 and 6
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharger with charge air cooler by oncoming air flow

      Hydraulic system

      Type of pump axial piston pump and piston type with load sensing

      Gear box

      Forward gears number 8 and 8
      Reverse gears number 4 and 4
      Transmission type HTE 840, Sequential direct drive gearbox with shifting under load Volvo and Powershift transmission with direct drive

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 16 degrees and 15.3 degrees

      Dump

      Mouldboard height 737 mm and 600 mm
      Mouldboard thickness 25 mm and 22 mm
      Mouldboard width 3657.6 mm and 4267.2 mm
      Left lateral displacement 673 mm and 533.4 mm
      Lateral right shift 673 mm and 685.8 mm
      Lowered blade pressure 9776 kg and 9355.8 kg

      Circle

      Diameter 1626 mm and 1752.6 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      8. Blade base 2790 mm 8. Blade base 2562 mm
      1. Dimensional length 9500 mm 1. Dimensional length 8534 mm
      2. Between tyres width 2780 mm 2. Between tyres width 2452 mm
      3. Height to cab upper part 3225 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 6531 mm 4. Wheelbase 6219 mm