vs.

      Volvo G990 vs. John Deere 670CH

      20 reasons to buy Volvo G990:

      Operation

      Hydraulic system fluid volume 91 l. and 59 l. 35 % more or 32 l.
      Transmission fluid volume 61 l. and 38 l. 38 % more or 23 l.
      Each tandem case fluid volume 105 l. and 75 l. 29 % more or 30 l.
      Fuel Capacity 498 l. and 403 l. 19 % more or 95 l.
      Oil system fluid volume 39 l. and 24 l. 38 % more or 15 l.
      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes
      Front axle standard operating weight 6200 kg and 3919 kg 37 % more or 2281 kg
      Cooling system fluid volume 47 l. and 42 l. 11 % more or 5 l.
      Rear axle standard operating weight 15900 kg and 10004 kg 37 % more or 5896 kg
      Front axle maximum operating weight 8390 kg and 4427 kg 47 % more or 3963 kg
      Rear axle maximum operating weight 19050 kg and 11641 kg 39 % more or 7409 kg

      Motor

      Maximum power 206.6 kW and 138 kW 33 % more or 68.6 kW
      Torque measured at 1550 rev / min and 1000 rev / min 35 % more or 550 rev
      Effective drives torque 7-8 1260 Nm and 847.4 Nm 33 % more or 412.6 Nm
      Effective speeds output 7-8 206.6 kW and 138 kW 33 % more or 68.6 kW
      Displacement 9.4 l. and 6.8 l. 28 % more or 2.6 l.

      Gear box

      Maximum forward speed 44.9 km/h and 40.2 km/h 10 % more or 4.7 km/h

      Front Axle

      Clearance 615 mm and 610 mm 1 % more or 5 mm

      Dump

      Blade pulling at maximum weight 17145 kg and 11080.4 kg 35 % more or 6064.6 kg

      Circle

      Blade tilt rear angle 13 degrees and 5 degrees 62 % more or 8 degrees

      8 reasons to buy John Deere 670CH:

      Steerage

      Turn radius 6.7 m and 8150 m 100 % less or 8143.3 m

      Motor

      Power measured at 2000 rev / min and 1700 rev / min 15 % more or 300 rev

      Hydraulic system

      Pump flow rate 173 l/min and 208 l/min 17 % less or 35 l/min

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum reverse gear 40.2 km/h and 31.6 km/h 21 % more or 8.6 km/h

      Circle

      Maximum radius outside left tyres 2160 mm and 2260 mm 4 % less or 100 mm
      Right maximum radius outside tyres 2110 mm and 2260 mm 7 % less or 150 mm
      Blade tilt front angle 49 degrees and 46 degrees 6 % more or 3 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 21 degrees and 25 degrees

      Sizes

      Blade base 2935 mm and 2670 mm
      Height to cab upper part 3280 mm and 3100 mm
      Dimensional length 9730 mm and 8580 mm
      Between tyres width 2800 mm and 2460 mm
      Wheelbase 6681 mm and 5970 mm

      Operation

      Tyre size 16:00 x 24, G-2 and 13.00-24
      Operating voltage 24 V and 24 V
      Overall standard operating weight 22100 kg and 13923 kg
      Total maximum operating weight 27200 kg and 16068 kg

      Motor

      Manufacturer Volvo and John Deere
      Model D9B and 6068H
      Cylinders number 6 and 6
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharging with subsequent air cooling (by a cooling radiator)

      Hydraulic system

      Type of pump axial piston pump and CLosed Center variable displacement piston pump
      Overflow valve pressure 20684.3 kPa and 17581.6 kPa

      Gear box

      Forward gears number 8 and 8
      Transmission type HTE 840, Sequential direct drive gearbox with shifting under load Volvo and powershift

      Front Axle

      General fluctuations 16 degrees and 32 degrees
      Wheel tilt 18 degrees and 20 degrees

      Dump

      Left lateral displacement 673 mm and 683 mm
      Lateral right shift 673 mm and 683 mm
      Mouldboard width 4267.2 mm and 3.7 mm
      Mouldboard height 787 mm and 610 mm
      Mouldboard thickness 25 mm and 22 mm

      Circle

      Diameter 1626 mm and 1520 mm
      Rotating 360 degrees and 360 degrees
      Left shift 762 mm and 787 mm
      Right shift 749 mm and 724 mm

      Images

      Sizes

      1. Dimensional length 9730 mm 1. Dimensional length 8580 mm
      2. Between tyres width 2800 mm 2. Between tyres width 2460 mm
      3. Height to cab upper part 3280 mm 3. Height to cab upper part 3100 mm
      4. Wheelbase 6681 mm 4. Wheelbase 5970 mm
      8. Blade base 2935 mm 8. Blade base 2670 mm