- Home/
- Comparison/
- Grader/
- Volvo G990 vs. John Deere 672A
Volvo G990 vs. John Deere 672A
20 reasons to buy Volvo G990:
Operation
Fuel Capacity | 498 l. and 227 l. | 54 % more or 271 l. |
Oil system fluid volume | 39 l. and 18.9 l. | 52 % more or 20.1 l. |
Generator current strength | 80 amperes and 42 amperes | 47 % more or 38 amperes |
Cooling system fluid volume | 47 l. and 26.5 l. | 44 % more or 20.5 l. |
Front axle standard operating weight | 6200 kg and 3947 kg | 36 % more or 2253 kg |
Rear axle standard operating weight | 15900 kg and 8460 kg | 47 % more or 7440 kg |
Each tandem case fluid volume | 105 l. and 18.9 l. | 82 % more or 86.1 l. |
Front axle maximum operating weight | 8390 kg and 4140 kg | 51 % more or 4250 kg |
Rear axle maximum operating weight | 19050 kg and 9855 kg | 48 % more or 9195 kg |
Motor
Maximum power | 206.6 kW and 93.2 kW | 55 % more or 113.4 kW |
Effective drives torque 7-8 | 1260 Nm and 504.4 Nm | 60 % more or 755.6 Nm |
Displacement | 9.4 l. and 6.8 l. | 28 % more or 2.6 l. |
Torque measured at | 1550 rev / min and 1300 rev / min | 16 % more or 250 rev |
Effective speeds output 7-8 | 206.6 kW and 93.2 kW | 55 % more or 113.4 kW |
Gear box
Maximum forward speed | 44.9 km/h and 38.5 km/h | 14 % more or 6.4 km/h |
Maximum reverse gear | 31.6 km/h and 12.2 km/h | 61 % more or 19.4 km/h |
Front Axle
Clearance | 615 mm and 559 mm | 9 % more or 56 mm |
Dump
Maximum cutting depth | 825 mm and 152 mm | 82 % more or 673 mm |
Circle
Blade tilt front angle | 46 degrees and 44 degrees | 4 % more or 2 degrees |
Blade tilt rear angle | 13 degrees and 10 degrees | 23 % more or 3 degrees |
6 reasons to buy John Deere 672A:
Steerage
Turn radius | 6.9 m and 8150 m | 100 % less or 8143.1 m |
Operation
Hydraulic system fluid volume | 143.8 l. and 91 l. | 37 % more or 52.8 l. |
Motor
Power measured at | 2300 rev / min and 1700 rev / min | 26 % more or 600 rev |
Hydraulic system
Pump flow rate | 142.3 l/min and 208 l/min | 32 % less or 65.7 l/min |
Circle
Right maximum radius outside tyres | 2150 mm and 2260 mm | 5 % less or 110 mm |
Maximum radius outside left tyres | 2220 mm and 2260 mm | 2 % less or 40 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 21 degrees and 25 degrees |
Sizes
Height to cab upper part | 3280 mm and 3200 mm |
Dimensional length | 9730 mm and 8310 mm |
Between tyres width | 2800 mm and 2390 mm |
Wheelbase | 6681 mm and 5970 mm |
Blade base | 2935 mm and 2540 mm |
Operation
Total maximum operating weight | 27200 kg and 13995 kg |
Tyre size | 16:00 x 24, G-2 and 13.00-24 |
Operating voltage | 24 V and 25 V |
Overall standard operating weight | 22100 kg and 12407 kg |
Motor
Manufacturer | Volvo and John Deere |
Model | D9B and 6-414T |
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging |
Cylinders number | 6 and 6 |
Hydraulic system
Type of pump | axial piston pump and variable displacement with locking in the middle position |
Gear box
Transmission type | HTE 840, Sequential direct drive gearbox with shifting under load Volvo and powershift transmission |
Forward gears number | 8 and 8 |
Reverse gears number | 4 and 4 |
Front Axle
Wheel tilt | 18 degrees and 20 degrees |
General fluctuations | 16 degrees and 30 degrees |
Dump
Mouldboard width | 4267.2 mm and 3.7 mm |
Mouldboard height | 787 mm and 610 mm |
Mouldboard thickness | 25 mm and 22 mm |
Left lateral displacement | 673 mm and 683 mm |
Lateral right shift | 673 mm and 683 mm |
Circle
Diameter | 1626 mm and 1.5 mm |
Rotating | 360 degrees and 360 degrees |
Left shift | 762 mm and 874 mm |
Right shift | 749 mm and 762 mm |
Images
Sizes
1. Dimensional length | 9730 mm | 1. Dimensional length | 8310 mm |
2. Between tyres width | 2800 mm | 2. Between tyres width | 2390 mm |
3. Height to cab upper part | 3280 mm | 3. Height to cab upper part | 3200 mm |
4. Wheelbase | 6681 mm | 4. Wheelbase | 5970 mm |
8. Blade base | 2935 mm | 8. Blade base | 2540 mm |