- Home/
- Comparison/
- Grader/
- Volvo G990 vs. Terex TG150
Volvo G990 vs. Terex TG150
17 reasons to buy Volvo G990:
Operation
Front axle standard operating weight | 6200 kg and 4300 kg | 31 % more or 1900 kg |
Rear axle standard operating weight | 15900 kg and 10200 kg | 36 % more or 5700 kg |
Fuel Capacity | 498 l. and 310 l. | 38 % more or 188 l. |
Cooling system fluid volume | 47 l. and 45 l. | 4 % more or 2 l. |
Transmission fluid volume | 61 l. and 18 l. | 70 % more or 43 l. |
Each tandem case fluid volume | 105 l. and 40 l. | 62 % more or 65 l. |
Generator current strength | 80 amperes and 55 amperes | 31 % more or 25 amperes |
Motor
Maximum power | 206.6 kW and 121.5 kW | 41 % more or 85.1 kW |
Displacement | 9.4 l. and 6 l. | 36 % more or 3.4 l. |
Gear box
Maximum forward speed | 44.9 km/h and 40 km/h | 11 % more or 4.9 km/h |
Maximum reverse gear | 31.6 km/h and 25 km/h | 21 % more or 6.6 km/h |
Forward gears number | 8 and 6 | 25 % more or 2 |
Reverse gears number | 4 and 3 | 25 % more or 1 |
Front Axle
Clearance | 615 mm and 546 mm | 11 % more or 69 mm |
Dump
Blade pulling at maximum weight | 17145 kg and 8161.9 kg | 52 % more or 8983.1 kg |
Circle
Right maximum radius outside tyres | 2260 mm and 3180 mm | 29 % less or 920 mm |
Maximum radius outside left tyres | 2260 mm and 2500 mm | 10 % less or 240 mm |
4 reasons to buy Terex TG150:
Steerage
Turn radius | 6.9 m and 8150 m | 100 % less or 8143.1 m |
Operation
Hydraulic system fluid volume | 150 l. and 91 l. | 39 % more or 59 l. |
Motor
Power measured at | 2200 rev / min and 1700 rev / min | 23 % more or 500 rev |
Hydraulic system
Pump flow rate | 99 l/min and 208 l/min | 52 % less or 109 l/min |
Neutral reasons:
Steerage
Left and right hinge connection | 21 degrees and 45 degrees |
Sizes
Height to cab upper part | 3280 mm and 3276 mm |
Dimensional length | 9730 mm and 9402 mm |
Between tyres width | 2800 mm and 2419 mm |
Wheelbase | 6681 mm and 5676 mm |
Blade base | 2935 mm and 2204 mm |
Operation
Overall standard operating weight | 22100 kg and 14500 kg |
Tyre size | 16:00 x 24, G-2 and 13.00 -24 TG SGG-2A Goodyear |
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | Volvo and Cummins |
Cylinders number | 6 and 6 |
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging |
Hydraulic system
Type of pump | axial piston pump and axial piston pump |
Overflow valve pressure | 20684.3 kPa and 18402.1 kPa |
Gear box
Transmission type | HTE 840, Sequential direct drive gearbox with shifting under load Volvo and powershift transmission with torque converter |
Front Axle
Wheel tilt | 18 degrees and 17 degrees |
General fluctuations | 16 degrees and 15 degrees |
Dump
Mouldboard width | 4267.2 mm and 3660 mm |
Mouldboard height | 787 mm and 580 mm |
Mouldboard thickness | 25 mm and 20 mm |
Left lateral displacement | 673 mm and 1250 mm |
Lateral right shift | 673 mm and 1250 mm |
Circle
Diameter | 1626 mm and 1348 mm |
Images
Sizes
1. Dimensional length | 9730 mm | 1. Dimensional length | 9402 mm |
2. Between tyres width | 2800 mm | 2. Between tyres width | 2419 mm |
3. Height to cab upper part | 3280 mm | 3. Height to cab upper part | 3276 mm |
4. Wheelbase | 6681 mm | 4. Wheelbase | 5676 mm |
8. Blade base | 2935 mm | 8. Blade base | 2204 mm |