vs.

      Volvo G990 vs. Volvo G710

      10 reasons to buy Volvo G990:

      Operation

      Front axle standard operating weight 6200 kg and 4264 kg 31 % more or 1936 kg
      Rear axle standard operating weight 15900 kg and 9630 kg 39 % more or 6270 kg

      Motor

      Effective drives torque 7-8 1260 Nm and 596.6 Nm 53 % more or 663.4 Nm
      Displacement 9.4 l. and 5.9 l. 37 % more or 3.5 l.
      Effective speeds output 7-8 206.6 kW and 104.4 kW 49 % more or 102.2 kW
      Maximum power 206.6 kW and 104.4 kW 49 % more or 102.2 kW

      Gear box

      Maximum forward speed 44.9 km/h and 39.8 km/h 11 % more or 5.1 km/h
      Maximum reverse gear 31.6 km/h and 28.5 km/h 10 % more or 3.1 km/h

      Front Axle

      Clearance 615 mm and 597 mm 3 % more or 18 mm

      Dump

      Blade pulling at maximum weight 17145 kg and 8667.7 kg 49 % more or 8477.3 kg

      5 reasons to buy Volvo G710:

      Steerage

      Turn radius 7.7 m and 8150 m 100 % less or 8142.3 m

      Motor

      Power measured at 2200 rev / min and 1700 rev / min 23 % more or 500 rev
      Torque measured at 1600 rev / min and 1550 rev / min 3 % more or 50 rev

      Hydraulic system

      Pump flow rate 191 l/min and 208 l/min 8 % less or 17 l/min

      Dump

      Maximum cutting depth 826 mm and 825 mm 0 % more or 1 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 21 degrees and 22 degrees

      Sizes

      Blade base 2935 mm and 2616 mm
      Dimensional length 9730 mm and 8458 mm
      Between tyres width 2800 mm and 2489 mm
      Wheelbase 6681 mm and 6096 mm

      Operation

      Overall standard operating weight 22100 kg and 13894 kg

      Motor

      Manufacturer Volvo and Cummins
      Model D9B and 6B5.9
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump axial piston pump and hydraulic system with load sensing
      Overflow valve pressure 20684.3 kPa and 17236.9 kPa

      Gear box

      Forward gears number 8 and 8
      Reverse gears number 4 and 4
      Transmission type HTE 840, Sequential direct drive gearbox with shifting under load Volvo and Volvo 8400

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 16 degrees and 16 degrees

      Dump

      Left lateral displacement 673 mm and 774.7 mm
      Lateral right shift 673 mm and 774.7 mm
      Mouldboard width 4267.2 mm and 3658 mm
      Mouldboard height 787 mm and 635 mm
      Mouldboard thickness 25 mm and 22.2 mm
      Lowered blade pressure 11058 kg and 7481.6 kg

      Circle

      Diameter 1626 mm and 1683 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 9730 mm 1. Dimensional length 8458 mm
      2. Between tyres width 2800 mm 2. Between tyres width 2489 mm
      4. Wheelbase 6681 mm 4. Wheelbase 6096 mm
      8. Blade base 2935 mm 8. Blade base 2616 mm