- Home/
- Comparison/
- Grader/
- Volvo G990 vs. Volvo G720
Volvo G990 vs. Volvo G720
17 reasons to buy Volvo G990:
Operation
Rear axle standard operating weight | 15900 kg and 10415 kg | 34 % more or 5485 kg |
Fuel Capacity | 498 l. and 387.5 l. | 22 % more or 110.5 l. |
Front axle standard operating weight | 6200 kg and 4361 kg | 30 % more or 1839 kg |
Hydraulic system fluid volume | 91 l. and 90 l. | 1 % more or 1 l. |
Transmission fluid volume | 61 l. and 38 l. | 38 % more or 23 l. |
Each tandem case fluid volume | 105 l. and 100 l. | 5 % more or 5 l. |
Motor
Maximum power | 206.6 kW and 119.3 kW | 42 % more or 87.3 kW |
Effective drives torque 7-8 | 1260 Nm and 759.3 Nm | 40 % more or 500.7 Nm |
Displacement | 9.4 l. and 8.3 l. | 12 % more or 1.1 l. |
Effective speeds output 7-8 | 206.6 kW and 119.3 kW | 42 % more or 87.3 kW |
Front Axle
Clearance | 615 mm and 609.6 mm | 1 % more or 5.4 mm |
Dump
Blade pulling at maximum weight | 17145 kg and 3562.1 kg | 79 % more or 13582.9 kg |
Maximum cutting depth | 825 mm and 444.5 mm | 46 % more or 380.5 mm |
Circle
Maximum radius outside left tyres | 2260 mm and 3048 mm | 26 % less or 788 mm |
Right maximum radius outside tyres | 2260 mm and 3035.3 mm | 26 % less or 775.3 mm |
Blade tilt front angle | 46 degrees and 45 degrees | 2 % more or 1 degrees |
Blade tilt rear angle | 13 degrees and 6.5 degrees | 50 % more or 6.5 degrees |
4 reasons to buy Volvo G720:
Steerage
Turn radius | 7.8 m and 8150 m | 100 % less or 8142.2 m |
Hydraulic system
Pump flow rate | 191 l/min and 208 l/min | 8 % less or 17 l/min |
Gear box
Maximum forward speed | 45.7 km/h and 44.9 km/h | 2 % more or 0.8 km/h |
Maximum reverse gear | 32.7 km/h and 31.6 km/h | 3 % more or 1.1 km/h |
Neutral reasons:
Steerage
Left and right hinge connection | 21 degrees and 72 degrees |
Sizes
Blade base | 2935 mm and 2591 mm |
Height to cab upper part | 3280 mm and 3099 mm |
Dimensional length | 9730 mm and 8484 mm |
Between tyres width | 2800 mm and 2540 mm |
Wheelbase | 6681 mm and 6096 mm |
Operation
Overall standard operating weight | 22100 kg and 14774 kg |
Cooling system fluid volume | 47 l. and 47 l. |
Operating voltage | 24 V and 24 V |
Motor
Cylinders number | 6 and 6 |
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging |
Manufacturer | Volvo and Cummins |
Model | D9B and 6C8.3 |
Hydraulic system
Type of pump | axial piston pump and hydraulic system with load sensing |
Overflow valve pressure | 20684.3 kPa and 17236.9 kPa |
Gear box
Reverse gears number | 4 and 4 |
Forward gears number | 8 and 8 |
Transmission type | HTE 840, Sequential direct drive gearbox with shifting under load Volvo and Volvo 8400 |
Front Axle
Wheel tilt | 18 degrees and 18 degrees |
General fluctuations | 16 degrees and 16 degrees |
Dump
Left lateral displacement | 673 mm and 673.1 mm |
Lateral right shift | 673 mm and 673.1 mm |
Lowered blade pressure | 11058 kg and 7582.7 kg |
Mouldboard width | 4267.2 mm and 3657.6 mm |
Mouldboard height | 787 mm and 635 mm |
Mouldboard thickness | 25 mm and 22.2 mm |
Circle
Rotating | 360 degrees and 360 degrees |
Left shift | 762 mm and 774.7 mm |
Right shift | 749 mm and 749.3 mm |
Images
Sizes
2. Between tyres width | 2800 mm | 2. Between tyres width | 2540 mm |
3. Height to cab upper part | 3280 mm | 3. Height to cab upper part | 3099 mm |
4. Wheelbase | 6681 mm | 4. Wheelbase | 6096 mm |
8. Blade base | 2935 mm | 8. Blade base | 2591 mm |
1. Dimensional length | 9730 mm | 1. Dimensional length | 8484 mm |