vs.

      Case 420CT serie 3 vs. Takeuchi TL150

      7 reasons to buy Case 420CT serie 3:

      Sizes

      Machine rear swing radius from center 1450 mm and 1745 mm 17 % less or 295 mm
      Turning radius with bucket from center 2050 mm and 2433.3 mm 16 % less or 383.3 mm

      Operation

      Generator current strength 95 amperes and 60 amperes 37 % more or 35 amperes
      Maximum speed at low range 9.3 km/h and 7.7 km/h 17 % more or 1.6 km/h
      Maximum speed at high range 13.5 km/h and 11.1 km/h 18 % more or 2.4 km/h

      Motor

      Power measured at 2500 rev / min and 2200 rev / min 12 % more or 300 rev

      Load-transfer device

      Tipping load 2592.3 kg and 3200.5 kg 19 % less or 608.2 kg

      14 reasons to buy Takeuchi TL150:

      Sizes

      Ground clearance at maximum lifting and unloading 3202.9 mm and 2420 mm 24 % more or 782.9 mm
      Radius at maximum lifting and unloading 985.5 mm and 630 mm 36 % more or 355.5 mm
      Clearance 335.3 mm and 213 mm 36 % more or 122.3 mm

      Operation

      Hydraulic system fluid volume 64 l. and 50 l. 22 % more or 14 l.
      Fuel Capacity 107.9 l. and 83.3 l. 23 % more or 24.6 l.
      Cooling system fluid volume 15.1 l. and 11.4 l. 25 % more or 3.7 l.
      Engine oil volume 14 l. and 8.5 l. 39 % more or 5.5 l.

      Motor

      Full power 72.3 kW and 55.2 kW 24 % more or 17.1 kW
      Peak torque 394.5 Nm and 275.2 Nm 30 % more or 119.3 Nm
      Displacement 4.4 l. and 3.2 l. 27 % more or 1.2 l.

      Hydraulic system

      Pump flow rate 88.6 l/min and 90 l/min 2 % less or 1.4 l/min

      Carrier

      Specific ground pressure 29.6 kPa and 40 kPa 26 % less or 10.4 kPa
      Rolling bearings number on either side 6 and 3 50 % more or 3
      Caterpillar track width 457.2 mm and 320 mm 30 % more or 137.2 mm

      Neutral reasons:

      Sizes

      Length with bucket 3290 mm and 3931.9 mm
      Height to cab upper part 2020 mm and 2319 mm
      Width between caterpillar tracks 1651 mm and 1859.3 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 3783 kg and 4945.1 kg

      Motor

      Manufacturer Case and Yanmar
      Model 432T/M3 and 4TNV106T
      Torque measured at 1400 rev / min and 1400 rev / min
      Cylinders number 4 and 4

      Load-transfer device

      Workload 1297.3 kg and 1120.4 kg

      Carrier

      Caterpillar track length on ground level 1438 mm and 1597.7 mm

      Images

      Sizes

      1. Length with bucket 3290 mm 1. Length with bucket 3931.9 mm
      2. Width between caterpillar tracks 1651 mm 2. Width between caterpillar tracks 1859.3 mm
      3. Height to cab upper part 2020 mm 3. Height to cab upper part 2319 mm
      5. Clearance 213 mm 5. Clearance 335.3 mm
      7. Ground clearance at maximum lifting and unloading 2420 mm 7. Ground clearance at maximum lifting and unloading 3202.9 mm
      8. Radius at maximum lifting and unloading 630 mm 8. Radius at maximum lifting and unloading 985.5 mm

      Carrier

      4. Caterpillar track length on ground level 1438 mm 4. Caterpillar track length on ground level 1597.7 mm