vs.

      Case 420CT vs. Case 420CT serie 3

      9 reasons to buy Case 420CT:

      Sizes

      Machine rear swing radius from center 1420 mm and 1450 mm 2 % less or 30 mm
      Turning radius with bucket from center 1970 mm and 2050 mm 4 % less or 80 mm

      Operation

      Cooling system fluid volume 17 l. and 11.4 l. 33 % more or 5.6 l.
      Engine oil volume 10.5 l. and 8.5 l. 19 % more or 2.0 l.

      Motor

      Power measured at 2900 rev / min and 2500 rev / min 14 % more or 400 rev
      Torque measured at 1700 rev / min and 1400 rev / min 18 % more or 300 rev

      Load-transfer device

      Tipping load 2268 kg and 2592.3 kg 13 % less or 324.3 kg

      Hydraulic system

      Pump flow rate 73.8 l/min and 90 l/min 18 % less or 16.2 l/min

      Carrier

      Specific ground pressure 35.8 kPa and 40 kPa 10 % less or 4.2 kPa

      8 reasons to buy Case 420CT serie 3:

      Sizes

      Clearance 213 mm and 203 mm 5 % more or 10 mm
      Ground clearance at maximum lifting and unloading 2420 mm and 2270 mm 6 % more or 150 mm

      Operation

      Generator current strength 95 amperes and 55 amperes 42 % more or 40 amperes
      Maximum speed at high range 13.5 km/h and 10.1 km/h 25 % more or 3.4 km/h

      Motor

      Displacement 3.2 l. and 2.2 l. 31 % more or 1.0 l.
      Full power 55.2 kW and 44 kW 20 % more or 11.2 kW
      Effective power 51.5 kW and 42 kW 18 % more or 9.5 kW
      Peak torque 275.2 Nm and 179 Nm 35 % more or 96.2 Nm

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1651 mm and 1651 mm
      Length with bucket 3130 mm and 3290 mm
      Length without bucket 2540 mm and 2600 mm
      Height to cab upper part 1920 mm and 2020 mm
      Radius at maximum lifting and unloading 630 mm and 630 mm

      Operation

      Working weight 3334 kg and 3783 kg
      Fuel Capacity 83.3 l. and 83.3 l.
      Hydraulic system fluid volume 50 l. and 50 l.

      Motor

      Model 422T/M2 and 432T/M3
      Cylinders number 4 and 4
      Aspiration turbocharging and turbocharging
      Manufacturer Case and Case

      Load-transfer device

      Workload 1134 kg and 1297.3 kg

      Hydraulic system

      Type of pump gear type pump and gear type pump

      Carrier

      Caterpillar track width 320 mm and 320 mm
      Rolling bearings number on either side 3 and 3
      Caterpillar track length on ground level 1436 mm and 1438 mm

      Images

      Sizes

      8. Radius at maximum lifting and unloading 630 mm 8. Radius at maximum lifting and unloading 630 mm
      1. Length with bucket 3130 mm 1. Length with bucket 3290 mm
      2. Width between caterpillar tracks 1651 mm 2. Width between caterpillar tracks 1651 mm
      3. Height to cab upper part 1920 mm 3. Height to cab upper part 2020 mm
      5. Clearance 203 mm 5. Clearance 213 mm
      6. Length without bucket 2540 mm 6. Length without bucket 2600 mm
      7. Ground clearance at maximum lifting and unloading 2270 mm 7. Ground clearance at maximum lifting and unloading 2420 mm

      Carrier

      4. Caterpillar track length on ground level 1436 mm 4. Caterpillar track length on ground level 1438 mm