- Home/
- Comparison/
- Rough Terrain Truck/
- Case 420CT vs. Gehl CTL65
Case 420CT vs. Gehl CTL65
9 reasons to buy Case 420CT:
Sizes
Machine rear swing radius from center | 1420 mm and 1549 mm | 8 % less or 129 mm |
Turning radius with bucket from center | 1970 mm and 2362 mm | 17 % less or 392 mm |
Operation
Engine oil volume | 10.5 l. and 10.2 l. | 3 % more or 0.3 l. |
Hydraulic system fluid volume | 50 l. and 38.6 l. | 23 % more or 11.4 l. |
Fuel Capacity | 83.3 l. and 75 l. | 10 % more or 8.3 l. |
Generator current strength | 55 amperes and 40 amperes | 27 % more or 15 amperes |
Cooling system fluid volume | 17 l. and 16.5 l. | 3 % more or 0.5 l. |
Motor
Power measured at | 2900 rev / min and 2500 rev / min | 14 % more or 400 rev |
Torque measured at | 1700 rev / min and 1600 rev / min | 6 % more or 100 rev |
12 reasons to buy Gehl CTL65:
Sizes
Clearance | 310 mm and 203 mm | 35 % more or 107 mm |
Ground clearance at maximum lifting and unloading | 2370 mm and 2270 mm | 4 % more or 100 mm |
Radius at maximum lifting and unloading | 730 mm and 630 mm | 14 % more or 100 mm |
Operation
Maximum speed at high range | 10.9 km/h and 10.1 km/h | 7 % more or 0.8 km/h |
Motor
Full power | 50 kW and 44 kW | 12 % more or 6 kW |
Peak torque | 242.7 Nm and 179 Nm | 26 % more or 63.7 Nm |
Displacement | 3.3 l. and 2.2 l. | 33 % more or 1.1 l. |
Load-transfer device
Tipping load | 2100 kg and 2268 kg | 7 % less or 168 kg |
Hydraulic system
Pump flow rate | 69.5 l/min and 73.8 l/min | 6 % less or 4.3 l/min |
Carrier
Specific ground pressure | 33.5 kPa and 35.8 kPa | 6 % less or 2.3 kPa |
Rolling bearings number on either side | 4 and 3 | 25 % more or 1 |
Caterpillar track width | 8128 mm and 320 mm | 96 % more or 7808 mm |
Neutral reasons:
Sizes
Width between caterpillar tracks | 1651 mm and 1580 mm |
Length with bucket | 3130 mm and 3543 mm |
Length without bucket | 2540 mm and 2756 mm |
Height to cab upper part | 1920 mm and 2123 mm |
Operation
Working weight | 3334 kg and 3635 kg |
Motor
Aspiration | turbocharging and natural aspiration |
Manufacturer | Case and Yanmar |
Model | 422T/M2 and 4TNV98 |
Cylinders number | 4 and 4 |
Load-transfer device
Workload | 1134 kg and 1050 kg |
Hydraulic system
Overflow valve pressure | 20684.3 kPa and 20601.5 kPa |
Carrier
Caterpillar track length on ground level | 1436 mm and 423367.2 mm |
Images
Sizes
1. Length with bucket | 3130 mm | 1. Length with bucket | 3543 mm |
2. Width between caterpillar tracks | 1651 mm | 2. Width between caterpillar tracks | 1580 mm |
3. Height to cab upper part | 1920 mm | 3. Height to cab upper part | 2123 mm |
5. Clearance | 203 mm | 5. Clearance | 310 mm |
6. Length without bucket | 2540 mm | 6. Length without bucket | 2756 mm |
7. Ground clearance at maximum lifting and unloading | 2270 mm | 7. Ground clearance at maximum lifting and unloading | 2370 mm |
8. Radius at maximum lifting and unloading | 630 mm | 8. Radius at maximum lifting and unloading | 730 mm |
Carrier
4. Caterpillar track length on ground level | 1436 mm | 4. Caterpillar track length on ground level | 423367.2 mm |