vs.

      Case 420CT vs. Takeuchi TL140

      9 reasons to buy Case 420CT:

      Sizes

      Machine rear swing radius from center 1420 mm and 1666.2 mm 15 % less or 246.2 mm
      Turning radius with bucket from center 1970 mm and 2293.6 mm 14 % less or 323.6 mm

      Operation

      Engine oil volume 10.5 l. and 9.6 l. 9 % more or 0.9 l.
      Generator current strength 55 amperes and 50 amperes 9 % more or 5 amperes
      Cooling system fluid volume 17 l. and 15.1 l. 11 % more or 1.9 l.

      Motor

      Power measured at 2900 rev / min and 2500 rev / min 14 % more or 400 rev

      Load-transfer device

      Tipping load 2268 kg and 2699.8 kg 16 % less or 431.8 kg
      Breakout power 2070 kg and 3357.9 kg 38 % less or 1287.9 kg

      Hydraulic system

      Pump flow rate 73.8 l/min and 75 l/min 2 % less or 1.2 l/min

      13 reasons to buy Takeuchi TL140:

      Sizes

      Ground clearance at maximum lifting and unloading 3121.7 mm and 2270 mm 27 % more or 851.7 mm
      Radius at maximum lifting and unloading 873.8 mm and 630 mm 28 % more or 243.8 mm
      Clearance 325.1 mm and 203 mm 38 % more or 122.1 mm

      Operation

      Hydraulic system fluid volume 51.9 l. and 50 l. 4 % more or 1.9 l.
      Maximum speed at high range 10.6 km/h and 10.1 km/h 5 % more or 0.5 km/h
      Fuel Capacity 90.1 l. and 83.3 l. 8 % more or 6.8 l.

      Motor

      Peak torque 261.7 Nm and 179 Nm 32 % more or 82.7 Nm
      Torque measured at 1800 rev / min and 1700 rev / min 6 % more or 100 rev
      Displacement 3.1 l. and 2.2 l. 29 % more or 0.9 l.
      Full power 60.4 kW and 44 kW 27 % more or 16.4 kW

      Carrier

      Rolling bearings number on either side 5 and 3 40 % more or 2
      Caterpillar track width 457.2 mm and 320 mm 30 % more or 137.2 mm
      Specific ground pressure 28.3 kPa and 35.8 kPa 21 % less or 7.5 kPa

      Neutral reasons:

      Sizes

      Length with bucket 3130 mm and 3708.4 mm
      Height to cab upper part 1920 mm and 2270.8 mm
      Width between caterpillar tracks 1651 mm and 1770.4 mm

      Operation

      Working weight 3334 kg and 4350 kg

      Motor

      Manufacturer Case and Isuzu
      Model 422T/M2 and 4JG1T
      Cylinders number 4 and 4

      Load-transfer device

      Workload 1134 kg and 944.8 kg

      Hydraulic system

      Overflow valve pressure 20684.3 kPa and 20601.5 kPa

      Carrier

      Caterpillar track length on ground level 1436 mm and 1496 mm

      Images

      Sizes

      8. Radius at maximum lifting and unloading 630 mm 8. Radius at maximum lifting and unloading 873.8 mm
      1. Length with bucket 3130 mm 1. Length with bucket 3708.4 mm
      2. Width between caterpillar tracks 1651 mm 2. Width between caterpillar tracks 1770.4 mm
      3. Height to cab upper part 1920 mm 3. Height to cab upper part 2270.8 mm
      5. Clearance 203 mm 5. Clearance 325.1 mm
      7. Ground clearance at maximum lifting and unloading 2270 mm 7. Ground clearance at maximum lifting and unloading 3121.7 mm

      Carrier

      4. Caterpillar track length on ground level 1436 mm 4. Caterpillar track length on ground level 1496 mm