vs.

      Case 445CT serie 3 vs. Gehl CTL60

      13 reasons to buy Case 445CT serie 3:

      Sizes

      Radius at maximum lifting and unloading 1030 mm and 851 mm 17 % more or 179 mm
      Machine rear swing radius from center 1400 mm and 1549 mm 10 % less or 149 mm
      Turning radius with bucket from center 2340 mm and 2362 mm 1 % less or 22 mm

      Operation

      Maximum speed at high range 12.9 km/h and 10.1 km/h 22 % more or 2.8 km/h
      Cooling system fluid volume 11.4 l. and 11 l. 4 % more or 0.4 l.
      Hydraulic system fluid volume 41.6 l. and 38.6 l. 7 % more or 3.0 l.
      Generator current strength 95 amperes and 40 amperes 58 % more or 55 amperes
      Maximum speed at low range 8.2 km/h and 7.2 km/h 12 % more or 1.0 km/h

      Motor

      Effective power 57.4 kW and 49.2 kW 14 % more or 8.2 kW
      Power measured at 2500 rev / min and 2450 rev / min 2 % more or 50 rev
      Peak torque 310.5 Nm and 245.4 Nm 21 % more or 65.1 Nm

      Carrier

      Caterpillar track width 450 mm and 320 mm 29 % more or 130 mm
      Specific ground pressure 29.6 kPa and 33.5 kPa 12 % less or 3.9 kPa

      8 reasons to buy Gehl CTL60:

      Sizes

      Clearance 310 mm and 283 mm 9 % more or 27 mm
      Ground clearance at maximum lifting and unloading 2370 mm and 2230 mm 6 % more or 140 mm

      Operation

      Fuel Capacity 75 l. and 65.5 l. 13 % more or 9.5 l.
      Engine oil volume 10.2 l. and 8.5 l. 17 % more or 1.7 l.

      Motor

      Displacement 3.3 l. and 3.2 l. 3 % more or 0.1 l.
      Torque measured at 1600 rev / min and 1400 rev / min 12 % more or 200 rev

      Load-transfer device

      Tipping load 2100.1 kg and 2993.7 kg 30 % less or 893.6 kg

      Hydraulic system

      Pump flow rate 68.1 l/min and 90.1 l/min 24 % less or 22.0 l/min

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 2112 mm and 1580 mm
      Length with bucket 3440 mm and 3543 mm
      Length without bucket 2650 mm and 2756 mm
      Height to cab upper part 2110 mm and 2123 mm

      Operation

      Working weight 4626.6 kg and 3400.6 kg
      Operating voltage 12 V and 12 V

      Motor

      Model 432T/M3 and 4TNV98
      Cylinders number 4 and 4
      Aspiration turbocharging and natural aspiration
      Manufacturer Case and Yanmar

      Load-transfer device

      Workload 1496.9 kg and 1050.1 kg

      Carrier

      Rolling bearings number on either side 4 and 4
      Caterpillar track length on ground level 499262.4 mm and 1389 mm

      Images

      Sizes

      8. Radius at maximum lifting and unloading 1030 mm 8. Radius at maximum lifting and unloading 851 mm
      1. Length with bucket 3440 mm 1. Length with bucket 3543 mm
      2. Width between caterpillar tracks 2112 mm 2. Width between caterpillar tracks 1580 mm
      3. Height to cab upper part 2110 mm 3. Height to cab upper part 2123 mm
      5. Clearance 283 mm 5. Clearance 310 mm
      6. Length without bucket 2650 mm 6. Length without bucket 2756 mm
      7. Ground clearance at maximum lifting and unloading 2230 mm 7. Ground clearance at maximum lifting and unloading 2370 mm

      Carrier

      4. Caterpillar track length on ground level 499262.4 mm 4. Caterpillar track length on ground level 1389 mm