vs.

      Case 445CT serie 3 vs. Mustang MTL25

      7 reasons to buy Case 445CT serie 3:

      Sizes

      Machine rear swing radius from center 1400 mm and 1816 mm 23 % less or 416 mm
      Turning radius with bucket from center 2340 mm and 2692 mm 13 % less or 352 mm

      Operation

      Generator current strength 95 amperes and 60 amperes 37 % more or 35 amperes
      Maximum speed at low range 8.2 km/h and 8 km/h 2 % more or 0.2 km/h
      Maximum speed at high range 12.9 km/h and 11 km/h 15 % more or 1.9 km/h

      Motor

      Power measured at 2500 rev / min and 2200 rev / min 12 % more or 300 rev

      Load-transfer device

      Tipping load 2993.7 kg and 3201 kg 6 % less or 207.3 kg

      13 reasons to buy Mustang MTL25:

      Sizes

      Clearance 363 mm and 283 mm 22 % more or 80 mm
      Ground clearance at maximum lifting and unloading 2375 mm and 2230 mm 6 % more or 145 mm
      Radius at maximum lifting and unloading 1041 mm and 1030 mm 1 % more or 11 mm

      Operation

      Fuel Capacity 108 l. and 65.5 l. 39 % more or 42.5 l.
      Hydraulic system fluid volume 95 l. and 41.6 l. 56 % more or 53.4 l.
      Cooling system fluid volume 15.1 l. and 11.4 l. 25 % more or 3.7 l.
      Engine oil volume 14 l. and 8.5 l. 39 % more or 5.5 l.

      Motor

      Full power 72 kW and 61.1 kW 15 % more or 10.9 kW
      Peak torque 395 Nm and 310.5 Nm 21 % more or 84.5 Nm
      Displacement 4.4 l. and 3.2 l. 27 % more or 1.2 l.

      Hydraulic system

      Pump flow rate 89 l/min and 90.1 l/min 1 % less or 1.1 l/min

      Carrier

      Rolling bearings number on either side 5 and 4 20 % more or 1
      Caterpillar track width 457 mm and 450 mm 2 % more or 7 mm

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 2112 mm and 1844 mm
      Length with bucket 3440 mm and 4026 mm
      Length without bucket 2650 mm and 3099 mm
      Height to cab upper part 2110 mm and 2217 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 4626.6 kg and 4850 kg

      Motor

      Manufacturer Case and Yanmar
      Model 432T/M3 and 4TNV106T
      Torque measured at 1400 rev / min and 1400 rev / min
      Cylinders number 4 and 4
      Aspiration turbocharging and turbocharging

      Load-transfer device

      Workload 1496.9 kg and 1600 kg

      Carrier

      Specific ground pressure 29.6 kPa and 29.6 kPa
      Caterpillar track length on ground level 499262.4 mm and 1598 mm

      Images

      Sizes

      1. Length with bucket 3440 mm 1. Length with bucket 4026 mm
      2. Width between caterpillar tracks 2112 mm 2. Width between caterpillar tracks 1844 mm
      3. Height to cab upper part 2110 mm 3. Height to cab upper part 2217 mm
      5. Clearance 283 mm 5. Clearance 363 mm
      6. Length without bucket 2650 mm 6. Length without bucket 3099 mm
      7. Ground clearance at maximum lifting and unloading 2230 mm 7. Ground clearance at maximum lifting and unloading 2375 mm
      8. Radius at maximum lifting and unloading 1030 mm 8. Radius at maximum lifting and unloading 1041 mm

      Carrier

      4. Caterpillar track length on ground level 499262.4 mm 4. Caterpillar track length on ground level 1598 mm