vs.

      Case TR320 vs. Caterpillar 299C

      7 reasons to buy Case TR320:

      Sizes

      Turning radius with bucket from center 2171.7 mm and 2314 mm 6 % less or 142.3 mm
      Clearance 243 mm and 231 mm 5 % more or 12 mm
      Ground clearance at maximum lifting and unloading 2600 mm and 2493 mm 4 % more or 107 mm

      Operation

      Generator current strength 95 amperes and 90 amperes 5 % more or 5 amperes
      Maximum speed at low range 9.3 km/h and 8.1 km/h 13 % more or 1.2 km/h

      Load-transfer device

      Tipping load 2903 kg and 3782.1 kg 23 % less or 879.1 kg

      Hydraulic system

      Pump flow rate 46 l/min and 84 l/min 45 % less or 38 l/min

      11 reasons to buy Caterpillar 299C:

      Sizes

      Radius at maximum lifting and unloading 763 mm and 540 mm 29 % more or 223 mm
      Machine rear swing radius from center 1775 mm and 1788.2 mm 1 % less or 13.2 mm

      Operation

      Fuel Capacity 98 l. and 96.5 l. 2 % more or 1.5 l.
      Engine oil volume 10 l. and 9.5 l. 5 % more or 0.5 l.
      Hydraulic system fluid volume 57 l. and 44.5 l. 22 % more or 12.5 l.
      Maximum speed at high range 13.6 km/h and 13.4 km/h 1 % more or 0.2 km/h

      Motor

      Full power 70.1 kW and 67.1 kW 4 % more or 3.0 kW
      Displacement 3.3 l. and 3.2 l. 3 % more or 0.1 l.
      Effective power 67.1 kW and 62.6 kW 7 % more or 4.5 kW

      Carrier

      Specific ground pressure 29.6 kPa and 33.1 kPa 11 % less or 3.5 kPa
      Contact with ground area 1.6 m2 and 1.3 m2 19 % more or 0.3 m2

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1900 mm and 1981 mm
      Length with bucket 3600 mm and 3820 mm
      Length without bucket 3000 mm and 3101 mm
      Height to cab upper part 2000 mm and 2117 mm

      Operation

      Working weight 4354.5 kg and 4867 kg
      Operating voltage 12 V and 12 V

      Motor

      Model 432T/M3 and C3.4 DIT
      Cylinders number 4 and 4
      Power measured at 2500 rev / min and 2500 rev / min
      Aspiration turbocharging and turbocharging
      Manufacturer Case and Caterpillar

      Load-transfer device

      Workload 1451.5 kg and 1882.4 kg

      Hydraulic system

      Overflow valve pressure 20684.3 kPa and 22994 kPa

      Images

      Sizes

      8. Radius at maximum lifting and unloading 540 mm 8. Radius at maximum lifting and unloading 763 mm
      1. Length with bucket 3600 mm 1. Length with bucket 3820 mm
      2. Width between caterpillar tracks 1900 mm 2. Width between caterpillar tracks 1981 mm
      3. Height to cab upper part 2000 mm 3. Height to cab upper part 2117 mm
      5. Clearance 243 mm 5. Clearance 231 mm
      6. Length without bucket 3000 mm 6. Length without bucket 3101 mm
      7. Ground clearance at maximum lifting and unloading 2600 mm 7. Ground clearance at maximum lifting and unloading 2493 mm