vs.

      Gehl CTL60 vs. Case 420CT

      10 reasons to buy Gehl CTL60:

      Sizes

      Clearance 310 mm and 203 mm 35 % more or 107 mm
      Ground clearance at maximum lifting and unloading 2370 mm and 2270 mm 4 % more or 100 mm
      Radius at maximum lifting and unloading 851 mm and 630 mm 26 % more or 221 mm

      Motor

      Effective power 49.2 kW and 42 kW 15 % more or 7.2 kW
      Peak torque 245.4 Nm and 179 Nm 27 % more or 66.4 Nm
      Displacement 3.3 l. and 2.2 l. 33 % more or 1.1 l.

      Load-transfer device

      Tipping load 2100.1 kg and 2268 kg 7 % less or 167.9 kg

      Hydraulic system

      Pump flow rate 68.1 l/min and 73.8 l/min 8 % less or 5.7 l/min

      Carrier

      Specific ground pressure 33.5 kPa and 35.8 kPa 6 % less or 2.3 kPa
      Rolling bearings number on either side 4 and 3 25 % more or 1

      10 reasons to buy Case 420CT:

      Sizes

      Machine rear swing radius from center 1420 mm and 1549 mm 8 % less or 129 mm
      Turning radius with bucket from center 1970 mm and 2362 mm 17 % less or 392 mm

      Operation

      Cooling system fluid volume 17 l. and 11 l. 35 % more or 6 l.
      Engine oil volume 10.5 l. and 10.2 l. 3 % more or 0.3 l.
      Hydraulic system fluid volume 50 l. and 38.6 l. 23 % more or 11.4 l.
      Generator current strength 55 amperes and 40 amperes 27 % more or 15 amperes
      Fuel Capacity 83.3 l. and 75 l. 10 % more or 8.3 l.

      Motor

      Power measured at 2900 rev / min and 2450 rev / min 16 % more or 450 rev
      Torque measured at 1700 rev / min and 1600 rev / min 6 % more or 100 rev

      Load-transfer device

      Breakout power 2070 kg and 3051.8 kg 32 % less or 981.8 kg

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1580 mm and 1651 mm
      Length with bucket 3543 mm and 3130 mm
      Length without bucket 2756 mm and 2540 mm
      Height to cab upper part 2123 mm and 1920 mm

      Operation

      Maximum speed at high range 10.1 km/h and 10.1 km/h
      Working weight 3400.6 kg and 3334 kg

      Motor

      Manufacturer Yanmar and Case
      Model 4TNV98 and 422T/M2
      Cylinders number 4 and 4
      Aspiration natural aspiration and turbocharging

      Load-transfer device

      Workload 1050.1 kg and 1134 kg

      Hydraulic system

      Overflow valve pressure 20601.5 kPa and 20684.3 kPa

      Carrier

      Caterpillar track length on ground level 1389 mm and 1436 mm
      Caterpillar track width 320 mm and 320 mm

      Images

      Sizes

      6. Length without bucket 2756 mm 6. Length without bucket 2540 mm
      7. Ground clearance at maximum lifting and unloading 2370 mm 7. Ground clearance at maximum lifting and unloading 2270 mm
      8. Radius at maximum lifting and unloading 851 mm 8. Radius at maximum lifting and unloading 630 mm
      1. Length with bucket 3543 mm 1. Length with bucket 3130 mm
      2. Width between caterpillar tracks 1580 mm 2. Width between caterpillar tracks 1651 mm
      3. Height to cab upper part 2123 mm 3. Height to cab upper part 1920 mm
      5. Clearance 310 mm 5. Clearance 203 mm

      Carrier

      4. Caterpillar track length on ground level 1389 mm 4. Caterpillar track length on ground level 1436 mm