- Home/
- Comparison/
- Rough Terrain Truck/
- Gehl CTL60 vs. Takeuchi TL130
Gehl CTL60 vs. Takeuchi TL130
6 reasons to buy Gehl CTL60:
Sizes
Machine rear swing radius from center | 1549 mm and 2082.8 mm | 26 % less or 533.8 mm |
Clearance | 310 mm and 309.9 mm | 0 % more or 0.1 mm |
Radius at maximum lifting and unloading | 851 mm and 731.5 mm | 14 % more or 119.5 mm |
Operation
Cooling system fluid volume | 11 l. and 10.9 l. | 1 % more or 0.1 l. |
Maximum speed at low range | 7.2 km/h and 7.1 km/h | 1 % more or 0.1 km/h |
Carrier
Caterpillar track width | 320 mm and 38.1 mm | 88 % more or 281.9 mm |
4 reasons to buy Takeuchi TL130:
Sizes
Turning radius with bucket from center | 1585 mm and 2362 mm | 33 % less or 777 mm |
Ground clearance at maximum lifting and unloading | 3030.2 mm and 2370 mm | 22 % more or 660.2 mm |
Operation
Hydraulic system fluid volume | 40.1 l. and 38.6 l. | 4 % more or 1.5 l. |
Carrier
Rolling bearings number on either side | 5 and 4 | 20 % more or 1 |
Neutral reasons:
Sizes
Width between caterpillar tracks | 1580 mm and 1579.9 mm |
Length with bucket | 3543 mm and 3431.5 mm |
Height to cab upper part | 2123 mm and 2235.2 mm |
Operation
Engine oil volume | 10.2 l. and 10.2 l. |
Operating voltage | 12 V and 12 V |
Generator current strength | 40 amperes and 40 amperes |
Maximum speed at high range | 10.1 km/h and 10.1 km/h |
Working weight | 3400.6 kg and 3400.6 kg |
Fuel Capacity | 75 l. and 75 l. |
Motor
Power measured at | 2450 rev / min and 2450 rev / min |
Manufacturer | Yanmar and Yanmar |
Peak torque | 245.4 Nm and 245.4 Nm |
Model | 4TNV98 and 4TNV98 |
Torque measured at | 1600 rev / min and 1600 rev / min |
Displacement | 3.3 l. and 3.3 l. |
Cylinders number | 4 and 4 |
Load-transfer device
Workload | 1050.1 kg and 734.8 kg |
Tipping load | 2100.1 kg and 2100.1 kg |
Breakout power | 3051.8 kg and 3051.8 kg |
Hydraulic system
Pump flow rate | 68.1 l/min and 68.1 l/min |
Overflow valve pressure | 20601.5 kPa and 20587.7 kPa |
Carrier
Specific ground pressure | 33.5 kPa and 33.5 kPa |
Caterpillar track length on ground level | 1389 mm and 1389.4 mm |
Images
Sizes
7. Ground clearance at maximum lifting and unloading | 2370 mm | 7. Ground clearance at maximum lifting and unloading | 3030.2 mm |
8. Radius at maximum lifting and unloading | 851 mm | 8. Radius at maximum lifting and unloading | 731.5 mm |
1. Length with bucket | 3543 mm | 1. Length with bucket | 3431.5 mm |
2. Width between caterpillar tracks | 1580 mm | 2. Width between caterpillar tracks | 1579.9 mm |
3. Height to cab upper part | 2123 mm | 3. Height to cab upper part | 2235.2 mm |
5. Clearance | 310 mm | 5. Clearance | 309.9 mm |
Carrier
4. Caterpillar track length on ground level | 1389 mm | 4. Caterpillar track length on ground level | 1389.4 mm |


