vs.

      Gehl CTL70 vs. Case 450CT serie 3

      11 reasons to buy Gehl CTL70:

      Sizes

      Turning radius with bucket from center 2294 mm and 2340 mm 2 % less or 46 mm
      Clearance 325 mm and 287 mm 12 % more or 38 mm
      Radius at maximum lifting and unloading 874 mm and 760 mm 13 % more or 114 mm

      Operation

      Fuel Capacity 90.1 l. and 78.4 l. 13 % more or 11.7 l.
      Cooling system fluid volume 15.1 l. and 11.4 l. 25 % more or 3.7 l.

      Motor

      Torque measured at 1800 rev / min and 1300 rev / min 28 % more or 500 rev
      Power measured at 2400 rev / min and 2300 rev / min 4 % more or 100 rev

      Load-transfer device

      Tipping load 2699.8 kg and 3499 kg 23 % less or 799.2 kg

      Hydraulic system

      Pump flow rate 75 l/min and 83 l/min 10 % less or 8 l/min

      Carrier

      Caterpillar track width 457 mm and 450 mm 2 % more or 7 mm
      Specific ground pressure 28.3 kPa and 33.1 kPa 15 % less or 4.8 kPa

      10 reasons to buy Case 450CT serie 3:

      Sizes

      Ground clearance at maximum lifting and unloading 2410 mm and 2408 mm 0 % more or 2 mm
      Machine rear swing radius from center 1520 mm and 1666 mm 9 % less or 146 mm

      Operation

      Engine oil volume 12 l. and 9.4 l. 22 % more or 2.6 l.
      Hydraulic system fluid volume 64.4 l. and 51.8 l. 20 % more or 12.6 l.
      Generator current strength 95 amperes and 50 amperes 47 % more or 45 amperes
      Maximum speed at low range 8.2 km/h and 7.2 km/h 12 % more or 1.0 km/h
      Maximum speed at high range 12.9 km/h and 10.3 km/h 20 % more or 2.6 km/h

      Motor

      Peak torque 390.5 Nm and 257.6 Nm 34 % more or 132.9 Nm
      Displacement 4.5 l. and 3.1 l. 31 % more or 1.4 l.
      Effective power 61.9 kW and 60.4 kW 2 % more or 1.5 kW

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1770 mm and 2112 mm
      Length with bucket 3708 mm and 3570 mm
      Length without bucket 2949 mm and 2790 mm
      Height to cab upper part 2167 mm and 2120 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 4350 kg and 4955.5 kg

      Motor

      Cylinders number 4 and 4
      Aspiration turbocharging and turbocharging
      Manufacturer Isuzu and Case
      Model 4JG1T and 445T/M3

      Load-transfer device

      Workload 1349.9 kg and 1749.5 kg

      Carrier

      Rolling bearings number on either side 4 and 4
      Caterpillar track length on ground level 1496 mm and 1638 mm

      Images

      Sizes

      1. Length with bucket 3708 mm 1. Length with bucket 3570 mm
      2. Width between caterpillar tracks 1770 mm 2. Width between caterpillar tracks 2112 mm
      3. Height to cab upper part 2167 mm 3. Height to cab upper part 2120 mm
      5. Clearance 325 mm 5. Clearance 287 mm
      6. Length without bucket 2949 mm 6. Length without bucket 2790 mm
      7. Ground clearance at maximum lifting and unloading 2408 mm 7. Ground clearance at maximum lifting and unloading 2410 mm
      8. Radius at maximum lifting and unloading 874 mm 8. Radius at maximum lifting and unloading 760 mm

      Carrier

      4. Caterpillar track length on ground level 1496 mm 4. Caterpillar track length on ground level 1638 mm